Datasheet4U Logo Datasheet4U.com

NCP59302 - 3.0A Very Low-Dropout (VLDO) Fast Transient Response Regulator

General Description

Pin Number 1 2 3 TAB 4 5 Pin Name EN VIN GND TAB VOUT ADJ Pin Function Enable Input: CMOS and TTL logic compatible.

Logic high = enable; Logic low = shutdown.

Input voltage which supplies both the internal circuitry and the current to the output load Ground TAB is connected to ground.

Key Features

  • consist of output current limiting, built.
  • in thermal shutdown and reverse output current protection. Logic level enable pin is available. The NCP59302 is an adjustable voltage device and is available in D2PAK.
  • 5 package. Features http://onsemi. com D2PAK CASE 936A.

📥 Download Datasheet

Datasheet Details

Part number NCP59302
Manufacturer onsemi
File Size 606.64 KB
Description 3.0A Very Low-Dropout (VLDO) Fast Transient Response Regulator
Datasheet download datasheet NCP59302 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
NCP500 150mA CMOS Low Noise Low-Dropout Voltage Regulator ON
NCP5007 Compact Backlight LED Boost Driver ON
NCP511 Low-Dropout Voltage Regulator ON
NCP51752 4.5-A/9-A Isolated Single Channel Gate Driver onsemi
NCP5203 2-in-1 DDR Power Controller ON

Other Datasheets by onsemi

Part Number Description
NCP59300 Very Low-Dropout (VLDO) Fast Transient Response Regulator
NCP590 Ultra Low Dropout CMOS LDO
NCP5901 VR12 Compatible Synchronous Buck MOSFET Drivers
NCP5901B VR12 Compatible Synchronous Buck MOSFET Drivers
NCP5901BE VR12 Compatible Synchronous Buck MOSFET Drivers

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
NCP59302, NCV59302 3.0 A, Very Low-Dropout (VLDO) Fast Transient Response Regulator series The NCP59302 is a high precision, very low dropout (VLDO), low ground current positive voltage regulator that is capable of providing an output current in excess of 3.0 A with a typical dropout voltage lower than 300 mV at 3.0 A load current. The device is stable with ceramic output capacitors. The device can withstand up to 18 V max input voltage. Internal protection features consist of output current limiting, built−in thermal shutdown and reverse output current protection. Logic level enable pin is available. The NCP59302 is an adjustable voltage device and is available in D2PAK−5 package. Features http://onsemi.