NCP612
NCP612 is CMOS Low Iq Voltage Regulator manufactured by onsemi.
features an ultra- low quiescent current of 40 m A. Each device contains a voltage reference unit, an error amplifier, a PMOS power transistor, resistors for setting output voltage, current limit, and temperature limit protection circuits.
The NCP612/NCV612 has been designed to be used with low cost ceramic capacitors. The device is housed in the micro- miniature SC70- 5 surface mount package. Standard voltage versions are 1.5, 1.8, 2.5, 2.7, 2.8, 3.0, 3.1, 3.3, 3.7, and 5.0 V.
Features
- Low Quiescent Current of 40 m A Typical
- Low Dropout Voltage of 230 m V at 100 m A and 3.0 V Vout
- Low Output Voltage Option
- Output Voltage Accuracy of 2.0%
- Temperature Range of
- 40°C to 85°C (NCP612)
Temperature Range of
- 40°C to 125°C (NCV612)
- NCV Prefix for Automotive and Other Applications Requiring
Unique Site and Control Change Requirements; AEC- Q100 Qualified and PPAP Capable
- These are Pb- Free Devices
Typical Applications
- Cellular Phones
- Battery Powered Consumer Products
- Hand- Held Instruments
- Camcorders and Cameras
Battery or Unregulated
Voltage
C1 +
1 2
Vout 5
+ C2
ON OFF
This device contains 86 active transistors
Figure 1. Typical Application Diagram
.onsemi.
SC70- 5 CASE 419A
PIN CONNECTIONS
Vin 1 Gnd 2 Enable 3
5 Vout 4 N/C
(Top View)
MARKING DIAGRAM
5 xxx M G G
1 xxx = Specific Device Code M = Date Code- G = Pb- Free Package (Note: Microdot may be in either location)
ORDERING INFORMATION
See detailed ordering and shipping information in the package dimensions section on page 8 of this data...
