Datasheet4U Logo Datasheet4U.com

NCP662 - CMOS Low Iq Low-Dropout Voltage Regulator

Description

Power supply ground.

2 2 Vin Positive power supply input voltage.

Regulated output voltage.

Enable This input is used to place the device into low

power standby.

When this input is pulled low, the device is disabled.

Features

  • an ultra.
  • low quiescent current of 2.5 mA. Each device contains a voltage reference unit, an error amplifier, a PMOS power transistor, resistors for setting output voltage, current limit, and temperature limit protection circuits. The NCP662/NCV662 series provides an enable pin for ON/OFF control. This series has been designed to be used with low cost ceramic capacitors and requires a minimum output capacitor of 0.1 mF. The device is housed in the micro.
  • miniature SC82.
  • AB s.

📥 Download Datasheet

Datasheet Details

Part number NCP662
Manufacturer onsemi
File Size 134.86 KB
Description CMOS Low Iq Low-Dropout Voltage Regulator
Datasheet download datasheet NCP662 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
NCP623 Ultra Low Noise 150mA Low Dropout Voltage Regulator ON
NCP-NFJ C15 Type Accessories Hirose Electric
NCP-NFP C15 Type Accessories Hirose Electric
NCP03WB473E05RL Thermistors Murata
NCP03WB473J05RL NTC Thermistors Murata

Other Datasheets by onsemi

Part Number Description
NCP663 CMOS Low Iq Low-Dropout Voltage Regulator
NCP600 LDO Regulator
NCP603 300mA High Performance CMOS LDO Regulator
NCP605 CMOS LDO Regulator
NCP606 CMOS LDO Regulator

Full PDF Text Transcription

Click to expand full text
NCP662, NCV662, NCP663, NCV663 Voltage Regulator - CMOS, Low Iq, Low-Dropout 100 mA This series of fixed output low−dropout linear regulators are designed for handheld communication equipment and portable battery powered applications which require low quiescent current. This series features an ultra−low quiescent current of 2.5 mA. Each device contains a voltage reference unit, an error amplifier, a PMOS power transistor, resistors for setting output voltage, current limit, and temperature limit protection circuits. The NCP662/NCV662 series provides an enable pin for ON/OFF control. This series has been designed to be used with low cost ceramic capacitors and requires a minimum output capacitor of 0.1 mF. The device is housed in the micro−miniature SC82−AB surface mount package.
Published: |