NCP734
NCP734 is LDO Regulator manufactured by onsemi.
feature set which make this LDO suitable for various industrial applications. The wide input voltage up to 38 V and output voltage up to 35 V is very useful for powering device from low power MCUs up to high performance motor drivers. Low quiescent current 13 m A allows to extend device battery life and design more efficient always- on devices. The power good feature with programmable delay brings additional safety for industrial applications. The NCP734 is available in thermal enhanced 3 mm x 3 mm DFN8 package. The device is stable with small 4.7 m F MLCC output capacitor.
Features
- Operating Input Voltage Range: 2.7 V to 38 V
- Available in Adjustable Voltage Option: 1.2 V to 35 V
- Available in Fixed Voltage Option: 3.3 V, 5 V
- Typ. ±1 % Accuracy
- Ultra- Low Quiescent Current Typ. 13 m A
- Standby Current 1 m A
- Very Low Dropout: 300 m V at 500 m A
- Operating Temperature:
- 40°C to 125°C
- Stable with a 4.7 m F Small Case Size Ceramic Capacitors
- Available in DFNW8 3 mm x 3 mm with EP
- These Devices are Pb- Free, Halogen Free/BFR Free and are Ro HS pliant
Typical Applications
- Test and Measurement Equipment
- Battery Power Tools
- Io T, Wireless Devices
- Smart Metering, Smart Grid
- Home Appliances
This document contains information on a product under development. onsemi reserves the right to change or discontinue this product without notice.
DATA SHEET .onsemi.
1 DFNW8 CASE 507AD
MARKING DIAGRAM
1 XXXX XXX ALYWG G
XXXX A L Y W G
= Specific Device Code = Assembly Location = Wafer Lot = Year = Work Week = Pb- Free Package
(Note: Microdot may be in either location)
PIN CONNECTONS
1 DELAY
OUT EP
ADJ/SNS GND
PG IN EN GND
(Top View)
ORDERING INFORMATION
See detailed ordering and shipping information on page 5 of this data sheet.
© Semiconductor ponents Industries, LLC, 2020
January, 2022
- Rev....
