NCP752 - Low Dropout Regulator

Product Overview

ON Semiconductor

Datasheet Details

Part number	NCP752
Manufacturer	ON Semiconductor
File Size	3.22 MB
Description	Low Dropout Regulator
Datasheet	NCP752 Datasheet
Additional preview pages of the NCP752 datasheet.

Product details

Description

Pin No. 5 Pin Name 1 5 OUT 2 4 PG 3 2 GND 4 3 EN 5 N/C 6 1 IN Description Regulated output voltage pin.A small 1 mF ceramic capacitor is needed from this pin to ground to assure stability.Open Drain Power Good Output.Power supply ground.Connected to the die through the lead frame.Soldered to the copper plane allows for effective heat dissipation.Enable pin.Driving EN over 0.9 V turns on the regulator.Driving EN below 0.4 V puts the regulat

Features

Operating Input Voltage Range: 2.0 V to 5.5 V.
Available in Fixed Voltage Options: 0.8 to 3.5 V Contact Factory for Other Voltage Options.
Ultra Low Quiescent Current of Typ. 12 mA.
Ultra Low Noise: 11.5 mVRMS from 100 Hz to 100 kHz.
Very Low Dropout: 130 mV Typical at 200 mA.
±2% Accuracy Over Load/Line/Temperature.
High PSRR: 68 dB at 1 kHz.
Power Good Output.
Internal Soft.
Start to Limit the Inrush Curre.

📁 Similar Datasheet

NCP702 - LDO Linear Voltage Regulator (On Semiconductor)
NCP-NFJ - C15 Type Accessories (Hirose Electric)
NCP-NFP - C15 Type Accessories (Hirose Electric)
NCP03WB473E05RL - Thermistors (Murata)
NCP03WB473J05RL - NTC Thermistors (Murata)
NCP03WB473K05RL - NTC Thermistors (Murata)
NCP03WB473x05RL - NTC Thermistors (Murata)
NCP03WF104E05RL - Thermistors (Murata)

Other Datasheets by ON Semiconductor

NCP700 - BiCMOS RF LDO Regulator
NCP700B - BiCMOS RF LDO Regulator
NCP700C - BiCMOS RF LDO Regulator
NCP703 - LDO Voltage Regulator
NCP705 - LDO Voltage Regulator
NCP706 - Very Low Dropout Voltage Regulator

Published: Feb 4, 2016 |