NCP81295
NCP81295 is Hot Swap Smart Fuse manufactured by onsemi.
Features
- Co- packaged Power Switch, Hotswap Controller and Current Sense
- Up to 60 A Peak Current Output, 50 A Continuous
- Vin Range: 4.5 V to 18 V
- 0.65 m W, no RSENSE Required
Control Features
- Enable Input
- Optional Enable- controlled Output Pulldown when Disabled
- Programmable Soft- Start
- Programmable, Multi- level Current Limit
Reporting Features
- Accurate Analog Load Current Monitor
- Programmable Over Current Alert Output
- Analog Temperature Output
- Status Fault OK Output
Other Features
- 5 mm x 5 mm QFN32 Package
- Operating Temperature:
- 40°C to 125°C
- Can be Paralleled for Higher Current Applications
- Built- in Insertion Delay for Hotswap Applications
- NCP81295: Latch off for Following Protection Features
NCP81296: Auto- Retry Mode for Following Protection Features
- Current- limit after Delay
- Fast Short- circuit Protection
- Over- Temperature Shutdown
- Excessive Soft- start Duration
- Internal Switch Fault Diagnostics
- Low- power Auxiliary Output Voltage
1 32 LQFN32 5x5, 0.5P
CASE 487AA
MARKING DIAGRAM
NCP8129x AWLYYWWG
NCP8129x = Specific Device Code x
= 5 or 6
= Assembly Location
WL = Wafer...
