NCP9002 Datasheet | onsemi

features a low- power consumption shutdown mode, which is achieved by driving the SHUTDOWN pin with logic low. The NCP9002 contains circuitry to prevent from “pop and click” noise that would otherwise occur during turn- on and turn- off transitions. For maximum flexibility, the NCP9002 provides an externally controlled gain (with resistors), as well as an externally controlled turn- on time (with the bypass capacitor). When using a 1 m F bypass capacitor, it offers 100 ms wake up time. Due to its excellent PSRR, it can be directly connected to the battery, saving the use of an LDO. This device is available in a 9- Pin Flip- Chip CSP (Lead- Free). Features - 1.3 W to an 8.0 W BTL Load from a 5.0 V Power Supply - Excellent PSRR: Direct Connection to the Battery - “Pop and Click” Noise Protection Circuit - Ultra Low Current Shutdown Mode: 10 n A - 2.2 V- 5.5 V Operation - External Gain Configuration Capability - External Turn- on Time Configuration Capability: 100 ms (1 m F Bypass Capacitor) - Up to 1.0 n F Capacitive Load Driving Capability - Thermal Overload Protection Circuitry - This is a Pb- Free Device Typical Applications - Portable Electronic Devices - PDAs - Wireless Phones http://onsemi. MARKING DIAGRAMS 9- Pin Flip- Chip CSP A3 FC SUFFIX MAZG A1 CASE 499E AYWW C1 A1 MAZ A Y WW G = Specific Device Code = Assembly Location = Year = Work Week = Pb- Free Package PIN CONNECTIONS 9- Pin Flip- Chip CSP A1 A2 INM OUTA B1 VM_P C1 B2 VM C2 A3 INP B3 Vp C3 BYPASS OUTB SHUTDOWN (Top View) ORDERING INFORMATION See detailed ordering and shipping information in the package dimensions section on page 12 of this data...