NCV2250 - Low Voltage Comparator

onsemi

General Description

Name Type VDD Power VSS Power OUT Output IN

Positive supply pin.

Connect to positive rail.

Negative supply pin.

Key Features

Propagation Delay: 50 ns with 100 mV Overdrive.
Rail.
to.
rail Input: VSS.
200 mV to VDD + 200 mV.
Supply Voltage: 1.8 V to 5.5 V.
Supply Current: 150 μA Typical at 5 V Supply.
Available with Push.
pull or Open Drain Output.
Packages: TSOP.
5 (SOT23.
5) and SC.
88A (SC70.
5).
NCV Prefix for Automotive and Other.

📥 Download Datasheet

NCV2250 low voltage comparator by onsemi - Datasheet Preview

Datasheet Details

Part number	NCV2250
Manufacturer	onsemi
File Size	472.55 KB
Description	Low Voltage Comparator
Datasheet	NCV2250 Datasheet

📁 Similar Datasheet

Part Number	Description	Manufacturer
NCV2902	Single Supply Quad Operational Amplifiers	ON
NCV3025833	Smart Power Stage	onsemi
NCV4279	5.0V Micropower 150mA LDO Linear Regulator	ON
NCV51153	4.5-A/9-A Isolated Single Channel Gate Driver	onsemi
NCV51563	4.5-A/9-A Isolated Dual Channel Gate Driver	onsemi

Other Datasheets by onsemi

Part Number	Description
NCV2252	Low Voltage Comparator
NCV2200	Low Voltage Comparators
NCV2211	Low Distortion Audio Power Amplifier
NCV2001	Single Operational Amplifier
NCV2002	Sub-One Volt Rail-to-Rail Operational Amplifier

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text

Comparator, High Speed, 50 ns, Low Voltage, Rail-to-Rail NCS2250, NCV2250, NCS2252, NCV2252 The NCS2250 and NCS2252 low voltage comparators feature fast response time and rail−to−rail input and output. The extended common mode input voltage range allows input signals 200 mV above and below the rails, allowing voltage detection at ground or the supply. A propagation delay of 50 ns with a 100 mV overdrive makes this comparator suitable for applications requiring faster response times. These single channel devices are available with a complementary push−pull output in the NCS2250 or with an open drain output in the NCS2252. Both options are offered in TSOP−5 (SOT23−5) and SC−88A (SC70−5) packages. Automotive qualified devices are also available, denoted by the NCV prefix.