900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf




  ON Semiconductor Electronic Components Datasheet  

NCV4264-2 Datasheet

Low Dropout Linear Regulator

No Preview Available !

NCV4264-2
Low IQ Low Dropout
Linear Regulator
The NCV4264−2 is functionally and pin for pin compatible with
NCV4264 with a lower quiescent current consumption. Its output
stage supplies 100 mA with "2.0% output voltage accuracy.
Maximum dropout voltage is 500 mV at 100 mA load current.
It is internally protected against 45 V input transients, input supply
reversal, output overcurrent faults, and excess die temperature. No
external components are required to enable these features.
Features
3.3 V and 5.0 V Fixed Output
"2.0% Output Accuracy, Over Full Temperature Range
60 mA Maximum Quiescent Current at IOUT = 100 mA
500 mV Maximum Dropout Voltage at 100 mA Load Current
Wide Input Voltage Operating Range of 4.5 V to 45 V
AEC−Q100 Grade 1 Qualified and PPAP Capable
Internal Fault Protection
−42 V Reverse Voltage
Short Circuit/Overcurrent
Thermal Overload
This is a Pb−Free Device
http://onsemi.com
MARKING
DIAGRAM
TAB
12 3
SOT−223
ST SUFFIX
CASE 318E
AYW
V642xG
G
1
8
1
SOIC−8 Fused
CASE 751
8
V642x
ALYWX
G
1
x = 5 (5.0 V Version)
= 3 (3.3 V Version)
A = Assembly Location
L = Wafer Lot
Y = Year
W = Work Week
G = Pb−Free Package
(Note: Microdot may be in either location)
PIN CONNECTIONS
(SOT−223)
PIN FUNCTION
1 VIN
2,TAB GND
3 VOUT
(SOIC−8 Fused)
PIN FUNCTION
1 NC
2, VIN
3 GND
4.
5−8.
VOUT
NC
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 9 of this data sheet.
© Semiconductor Components Industries, LLC, 2014
November, 2014 − Rev. 8
1
Publication Order Number:
NCV4264−2/D


  ON Semiconductor Electronic Components Datasheet  

NCV4264-2 Datasheet

Low Dropout Linear Regulator

No Preview Available !

NCV4264−2
IN OUT
1.3 V
Reference
+
Error
Amp
-
Thermal
Shutdown
GND
PIN FUNCTION DESCRIPTION
Pin No.
SOT−223
SOIC−8
Symbol
1 2 VIN
2 3 GND
3 4 VOUT
TAB − GND
1, 5−8
NC
Figure 1. Block Diagram
Function
Unregulated input voltage; 4.5 V to 45 V.
Ground; substrate.
Regulated output voltage; collector of the internal PNP pass transistor.
Ground; substrate and best thermal connection to the die.
No Connection.
OPERATING RANGE
Rating
VIN, DC Input Operating Voltage (Note 3)
Junction Temperature Operating Range
Symbol
VIN
TJ
Min Max
4.5 +45
−40 +150
Unit
V
°C
MAXIMUM RATINGS
Rating
Symbol
Min Max
Unit
VIN, DC Input Voltage
VOUT, DC Voltage
Storage Temperature
Moisture Sensitivity Level
SOT223
SOIC−8 Fused
VIN
VOUT
Tstg
MSL
−42 +45
−0.3 +18
−55 +150
3
1
V
V
°C
ESD Capability, Human Body Model (Note 1)
ESD Capability, Machine Model (Note 1)
Lead Temperature Soldering
Reflow (SMD Styles Only), Lead Free (Note 2)
VESDHB
VESDMIM
Tsld
4000
200
265 pk
V
V
°C
Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality
should not be assumed, damage may occur and reliability may be affected.
1. This device series incorporates ESD protection and is tested by the following methods:
ESD HBM tested per AEC−Q100−002 (EIA/JESD22−A 114C)
ESD MM tested per AEC−Q100−003 (EIA/JESD22−A 115C)
2. Lead Free, 60 sec – 150 sec above 217°C, 40 sec max at peak.
3. See specific conditions for DC operating input voltage lower than 4.5 V in the ELECTRICAL CHRACTERISTICS table at page 3
http://onsemi.com
2


Part Number NCV4264-2
Description Low Dropout Linear Regulator
Maker ON Semiconductor
Total Page 11 Pages
PDF Download

NCV4264-2 Datasheet PDF

View PDF for Mobile








Similar Datasheet

1 NCV4264-2 Low Dropout Linear Regulator
ON Semiconductor
2 NCV4264-2C Low Dropout Linear Regulator
ON Semiconductor





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z

Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy