NCV47823 - Dual High Side Switch

Product Overview

ON Semiconductor

Datasheet Details

Part number	NCV47823
Manufacturer	ON Semiconductor
File Size	205.59 KB
Description	Dual High Side Switch
Datasheet	NCV47823 Datasheet
Additional preview pages of the NCV47823 datasheet.

Product details

Description

Pin No. 14 EPAD Pin Name Description 1 Vin Power Supply Input for Channel 1 and supply of control circuits of whole chip.At least 4.4 V power supply must be used for proper IC functionality.2 CSO1 Current Sense Output 1, Current Limit setting and Output Current value information.See Application Section for more details.3 EN1 Enable Input 1; low level disables the Channel 1. (Used also for OFF state diagnostics control for Channel 1) 4 GND Power Supply Ground.5

Features

The NCV47823 is designed for using in harsh automotive environments providing dual mode operation depending on the load impedance: High Side Switch (HSS) or Constant Current Source (CCS). In both modes of operation the current limit can be set up to 350 mA per channel by external resistor. The device has a high peak input voltage tolerance and reverse input voltage, reverse bias, overcurrent and overtemperature protections. The integrated current sense feature (adjustable by resistor connected t.

📁 Similar Datasheet

NCV4279 - 5.0V Micropower 150mA LDO Linear Regulator (ON)
NCV2902 - Single Supply Quad Operational Amplifiers (ON)
NCV3025833 - Smart Power Stage (onsemi)
NCV51153 - 4.5-A/9-A Isolated Single Channel Gate Driver (onsemi)
NCV51563 - 4.5-A/9-A Isolated Dual Channel Gate Driver (onsemi)
NCV551 - Low-Dropout Voltage Regulator (ON)
NCV70628 - Micro-stepping Motor Driver (onsemi)
NCV7383 - Transceiver (ON Semiconducto)

Other Datasheets by ON Semiconductor

NCV47821 - 3.3V to 20V Adjustable Dual LDO
NCV47822 - Dual High Side Switch
NCV47411 - 3.3V to 20V Adjustable Dual LDO Regulator
NCV47551 - 3.3V to 20V Adjustable Low Noise LDO Regulator
NCV47700 - 5V to 20V Adjustable Low Dropout Regulator
NCV47701 - 5V to 20V Adjustable Low Dropout Regulator

Published: Jul 4, 2022 |