NCV57540, NCV57530 Datasheet - ON Semiconductor

NCV57540 Isolated Dual Channel IGBT Gate Driver

Pin Name No. I/O Description INA INB VDDI 1 Input A non-inverting gate driver input that defines OUTA. It has an equivalent pull *down resistor of 125 kW to ensure that output is low in the absence of an input signal. A positive or negative going pulse with pulse width longer than m.

DATA SHEET www.onsemi.com Isolated Dual Channel IGBT Gate Driver NCD57530, NCV57530, NCD57540, NCV57540 1 SOIC 16 WB CASE 752AJ NCx575y0 are high current two channel isolated IGBT gate drivers with 5 kVrms internal galvanic isolation from input to each output and functional isolation between the two output channels. The device accepts 3.3 V to 20 V bias voltage and signal levels on the input side and up to 32 V bias voltage on the output side. The device accepts complementary.

NCV57540 Features

* High Peak Output Current (±6.5 A)

* Configurable as a Dual Low

* Side or Dual High

* Side or Half

* Bridge Driver

* Programmable Overlap or Dead Time control

* Disable Pin to Turn Off Outputs for Power Sequencing (NCx57540)

* Enable Pin for

NCV57530-ONSemiconductor.pdf