Datasheet4U Logo Datasheet4U.com

NCV68261 - Ideal Diode and High Side Switch NMOS Controller

Description

Pin No.

inverting input of the internal comparator.

to GND with a ceramic capacitor.

Features

  • Operating Voltage Range: up to 32 V.
  • Immune to 60 V Load Dump Pulse V6MG G.
  • Immune to.
  • 40 V Negative Transient.
  • Overvoltage Protection.
  • Disconnects the load from battery at VIN = 35.6 V typ.
  • Enable Function (3.3 V Logic Compatible Thresholds) V6 = Specific Device Code M = Month Code G = Pb.
  • Free Package (Note: Microdot may be in either location).
  • Ideal Diode Function.
  • Protecting against Reverse Current Fl.

📥 Download Datasheet

Datasheet Details

Part number NCV68261
Manufacturer onsemi
File Size 430.15 KB
Description Ideal Diode and High Side Switch NMOS Controller
Datasheet download datasheet NCV68261 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
NCV2902 Single Supply Quad Operational Amplifiers ON
NCV3025833 Smart Power Stage onsemi
NCV4279 5.0V Micropower 150mA LDO Linear Regulator ON
NCV51153 4.5-A/9-A Isolated Single Channel Gate Driver onsemi
NCV51563 4.5-A/9-A Isolated Dual Channel Gate Driver onsemi

Other Datasheets by onsemi

Part Number Description
NCV68061 Ideal Diode NMOS Controller
NCV612 CMOS Low Iq Voltage Regulator
NCV6323 2A Synchronous Buck Converter
NCV6323F PWM Synchronous Buck Converter
NCV6324 2A Synchronous Buck Converter

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
DATA SHEET www.onsemi.com Ideal Diode and High Side Switch NMOS Controller NCV68261 WDFNW6 CASE 511DW The NCV68261 is a Reverse Polarity Protection and Ideal Diode NMOS Controller with optional High Side Switch function, intended as a lower loss and lower forward voltage replacement for power rectifier diodes and mechanical power switches. The controller operates in conjunction with one or two N−channel MOSFETs and sets the ON/OFF state of the transistors based on the state of the Enable pin and the Input−to−Drain differential voltage polarity. Depending on the Drain pin connection, both Ideal Diode and High Side Switch applications can operate in two different modes.
Published: |