Datasheet4U Logo Datasheet4U.com

NCV7356 - Single Wire CAN Transceiver

Description

SOIC 8 SOIC

1 2 TxD Transmit data from microprocessor to CAN.

Operating mode select input 0.

Operating mode select input 1.

Features

  • undervoltage lockout, timeout for faulty blocked input signals, output blanking time in case of bus ringing and a very low sleep mode current. The device is compliant with GMW3089V2.4 General Motors Corporation specification. Features.
  • Fully Compatible with J2411 Single Wire CAN Specification.
  • 60 mA (max) Sleep Mode Current.
  • Operating Voltage Range 5.0 to 27 V.
  • Up to 100 kbps High.
  • Speed Transmission Mode.
  • Up to 40 kbps Bus Speed.
  • Sele.

📥 Download Datasheet

Datasheet Details

Part number NCV7356
Manufacturer onsemi
File Size 202.47 KB
Description Single Wire CAN Transceiver
Datasheet download datasheet NCV7356 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
NCV7383 Transceiver ON Semiconducto
NCV70628 Micro-stepping Motor Driver onsemi
NCV7410 Automotive Ethernet Transceiver onsemi
NCV7424 Four Channel LIN Transceiver ON Semiconducto
NCV7518 Hex Low side MOSFET Pre driver ON Semiconducto

Other Datasheets by onsemi

Part Number Description
NCV7351 High Speed CAN Transceiver
NCV7351F High Speed CAN Transceiver
NCV7357 CAN FD Transceiver
NCV7321 Stand Alone LIN Transceiver
NCV7340 High Speed Low Power CAN Transceiver

Full PDF Text Transcription

Click to expand full text
NCV7356 Single Wire CAN Transceiver The NCV7356 is a physical layer device for a single wire data link capable of operating with various Carrier Sense Multiple Access with Collision Resolution (CSMA/CR) protocols such as the Bosch Controller Area Network (CAN) version 2.0. This serial data link network is intended for use in applications where high data rate is not required and a lower data rate can achieve cost reductions in both the physical media components and in the microprocessor and/or dedicated logic devices which use the network. The network shall be able to operate in either the normal data rate mode or a high−speed data download mode for assembly line and service data transfer operations.
Published: |