NCV84160 Datasheet | onsemi

Self Protected Very Low Iq High Side Driver with Analog Current Sense The NCV84160 is a fully protected single channel high side driver that can be used to switch a wide variety of loads, such as bulbs, solenoids, and other actuators. The device incorporates advanced protection Features such as active inrush current management, over- temperature shutdown with automatic restart and an overvoltage active clamp. A dedicated Current Sense pin provides precision analog current monitoring of the output as well as fault indication of short to VD, short circuit to ground and ON and OFF state open load detection. An active high Current Sense Disable pin allows all diagnostic and current sense Features to be disabled. Features - Short Circuit Protection with Inrush Current Management - CMOS (3 V / 5 V) patible Control Input - Very Low Standby Current - Very Low Current Sense Leakage - Proportional Load Current Sense - Current Sense Disable - Off State Open Load Detection - Output Short to VD Detection - Overload and Short to Ground Indication - Thermal Shutdown with Automatic Restart - Undervoltage Shutdown - Integrated Clamp for Inductive Switching - Loss of Ground and Loss of VD Protection - ESD Protection - Reverse Battery Protection - AEC- Q100 Qualified - This is a Pb- Free Device Typical Applications - Switch a Variety of Resistive, Inductive and Capacitive Loads - Can Replace Electromechanical Relays and Discrete Circuits - Automotive / Industrial FEATURE SUMMARY Max Supply Voltage Operating Voltage Range RDSon (max) TJ = 25°C Output Current Limit (typical) OFF- state Supply Current (typical) 4.5 to 28 160 m...