NCV8506
NCV8506 is LDO Linear Regulators manufactured by onsemi.
NCV8506 Series
Micropower 400 m A LDO Linear Regulators with DELAY and RESET
The NCV8506 is a family of precision micropower voltage regulators. Their output current capability is 400 m A. The family has output voltage options for Adjustable, 2.5 V, 3.3 V and 5.0 V.
The output voltage is accurate within ± 2.0% with a maximum dropout voltage of 0.6 V at 400 m A. Low quiescent current is a feature drawing only 100 m A with a 100 m A load. This part is ideal for any and all battery operated microprocessor equipment.
Microprocessor control logic includes an active RESET (with DELAY).
The active RESET circuit operates correctly at an output voltage as low as 1.0 V. The RESET function is activated during the power up sequence or during normal operation if the output voltage drops below the regulation limits.
The regulator is protected against reverse battery, short circuit, and thermal overload conditions. The device can withstand load dump transients making it suitable for use in automotive environments. The device has also been optimized for EMC conditions.
Features
- Output Voltage Options: Adjustable, 2.5 V, 3.3 V, 5.0 V
- ± 2.0% Output
- Low 100 m A Quiescent Current
- Fixed or Adjustable Output Voltage
- Active RESET
- 400 m A Output Current Capability
- Fault Protection
- +60 V Peak Transient Voltage
- - 15 V Reverse Voltage
- Short Circuit
- Thermal Overload
- NCV Prefix for Automotive and Other Applications Requiring Site and Change Control
- AEC Qualified
- PPAP Capable
- These are Pb- Free Devices http://onsemi.
MARKING DIAGRAM
D2PAK- 7 DPS SUFFIX CASE 936AB
NC V8506x AWLYWWG
1 x = Voltage Ratings as Indicated Below: A = Adjustable 2 = 2.5 V 3 = 3.3 V 5 = 5.0 V
A = Assembly Location WL = Wafer Lot Y = Year WW = Work Week G = Pb- Free Package
ORDERING INFORMATION
See detailed ordering and shipping information in the package dimensions section on page 11 of this data...
