NCV8730 Datasheet | onsemi

features - very low quiescent current, fast transient response and high input and output voltage ranges. The NCV8730 is CMOS LDO regulator designed for up to 38 V input voltage and 150 m A output current. Quiescent current of only 1 m A makes this device ideal solution for battery- powered, always- on systems. Several fixed output voltage versions are available as well as the adjustable version. The device (version B) implements power good circuit (PG) which indicates that output voltage is in regulation. This signal could be used for power sequencing or as a microcontroller reset. Internal short circuit and over temperature protections saves the device against overload conditions. Features - Operating Input Voltage Range: 2.7 V to 38 V - Output Voltage: - 1.2 V to 24 V (FIX) - 1.2 V to 37 V (ADJ) - Capable of Sourcing 200 m A Peak Output Current - Very Low Quiescent Current: 1 m A typ. - Low Dropout: 290 m V typ. at 150 m A, 3.3 V Version - Output Voltage Accuracy ±1% - Power Good Circuit (Version B) - Stable with Small 1 m F Ceramic Capacitors - Built- in Soft Start Circuit to Suppress Inrush Current - Over- Current and Thermal Shutdown Protections - Available in Small TSOP- 5 and WDFNW6 (2x2) Packages - NCV Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements; AEC- Q100 Qualified and PPAP Capable - These Devices are Pb- Free and are Ro HS pliant Typical Applications - Body Control Modules - LED Lighting - On Board Charger - General Purpose Automotive DATA SHEET .onsemi. MARKING DIAGRAMS 5 1 TSOP- 5 CASE 483 SN SUFFIX XXXAYWG G XXX = Specific Device Code A = Assembly Location Y = Year W = Work Week G = Pb- Free Package (Note: Microdot may be in either location) WDFNW6 (2x2) CASE 511DW MTW SUFFIX 1 XX M XX = Specific Device Code M = Date Code PIN ASSIGNMENTS TSOP-...