900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf




  ON Semiconductor Electronic Components Datasheet  

NHP160SF Datasheet

Surface Mount Ultrafast Power Rectifier

No Preview Available !

NHP160SF, NRVHP160SF
Surface Mount
Ultrafast Power Rectifier
Plastic SOD−123FL Package
This SOD−123FL ultrafast rectifier provides fast switching
performance with soft recovery in a compact thermally efficient
package. Its compact footprint makes it ideally suited to portable and
automotive applications where board space is at a premium. Its low
profile makes it a good option for flat panel display and other
applications with limited vertical clearance. The device offers low
leakage over temperature making it a good match for applications
requiring low quiescent current.
Features
Fast Soft Switching for Reduced EMI and Higher Efficiency
Low Profile − Maximum Height of 1.0 mm
Small Footprint − Footprint Area of 5.94 mm2
NRV Prefix for Automotive and Other Applications Requiring
Unique Site and Control Change Requirements; AEC−Q101
Qualified and PPAP Capable
These Devices are Pb−Free, Halogen Free/BFR Free and are RoHS
Compliant
Mechanical Characteristics:
Case: Molded Epoxy
Epoxy Meets UL 94 V−0 @ 0.125 in
Weight: 11.7 mg (Approximately)
Lead and Mounting Surface Temperature for Soldering Purposes:
260°C Maximum for 10 Seconds
MSL 1
Applications
Automotive HID Lighting
Diesel Piezo Injection
Power Factor Correction in Mini Adapters
Freewheeling Diode Where Space is at a Premium
www.onsemi.com
ULTRAFAST RECTIFIER
1.0 AMPERES
600 VOLTS
SOD−123FL
CASE 498
MARKING DIAGRAM
P16MG
G
P16 = Specific Device Code
M = Date Code
G = Pb−Free Package
(Note: Microdot may be in either location)
ORDERING INFORMATION
Device
NHP160SFT3G
Package
Shipping
SOD−123 10000/Tape & Reel
(Pb−Free)
NRVHP160SFT3G SOD−123 10000/Tape & Reel
(Pb−Free)
†For information on tape and reel specifications,
including part orientation and tape sizes, please
refer to our Tape and Reel Packaging Specification
Brochure, BRD8011/D.
© Semiconductor Components Industries, LLC, 2014
March, 2018 − Rev. 0
1
Publication Order Number:
NHP160SF/D


  ON Semiconductor Electronic Components Datasheet  

NHP160SF Datasheet

Surface Mount Ultrafast Power Rectifier

No Preview Available !

NHP160SF, NRVHP160SF
MAXIMUM RATINGS
Rating
Symbol
Value
Unit
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
Average Rectified Forward Current
(TL = 150°C)
Peak Repetitive Forward Current
(Square Wave, 20 kHz, TL = 145°C)
Non−Repetitive Peak Surge Current
(Surge Applied at Rated Load Conditions Halfwave, Single Phase, 60 Hz)
VRRM
VRWM
VR
IO
IFRM
IFSM
600 V
1.0 A
2.0 A
15 A
Storage and Operating Junction Temperature Range (Note 1)
Tstg, TJ
−65 to +175
°C
Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality
should not be assumed, damage may occur and reliability may be affected.
1. The heat generated must be less than the thermal conductivity from Junction−to−Ambient: dPD/dTJ < 1/RqJA.
THERMAL CHARACTERISTICS
Characteristic
Symbol
Value
Unit
Thermal Resistance, Junction−to−Lead (Note 2)
Thermal Resistance, Junction−to−Ambient (Note 2)
Thermal Resistance, Junction−to−Ambient (Note 3)
ELECTRICAL CHARACTERISTICS
YJCL
RqJA
RqJA
12 °C/W
86.7 °C/W
330 °C/W
Characteristic
Test Conditions
Symbol
Typ
Max Unit
Instantaneous Forward Voltage (Note 4)
Instantaneous Reverse Current (Note 4)
Reverse Recovery Time
Peak Reverse Recovery Current
Total Reverse Recovery Charge
Softness Factor
(IF = 1 A, TC = 125°C)
(IF = 1 A, TC = 25°C)
(Rated DC Voltage, TC = 125°C)
(Rated DC Voltage, TC = 25°C)
(IF = 1 A, dIF/dt = −50 A/ms, TC = 25°C)
VF
IR
trr
IRM
Qrr
S
1.9
3.0
5
0.02
9
0.5
2.1
0.8
2.6 V
3.8
20 mA
2.0
50 ns
3A
50 nC
3−
Reverse Recovery Time
Peak Reverse Recovery Current
Total Reverse Recovery Charge
Softness Factor
(IF = 1 A, dIF/dt = −50 A/ms, TC = 125°C)
trr
IRM
Qrr
S
30
0.7
12
2.4
− ns
−A
− nC
−−
Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product
performance may not be indicated by the Electrical Characteristics if operated under different conditions.
2. Mounted with 700 mm2 copper pad size (Approximately 1 in2) 1 oz FR4 Board.
3. Mounted with pad size approximately 20 mm2 copper, 1 oz FR4 Board.
4. Pulse Test: Pulse Width 380 ms, Duty Cycle 2.0%.
www.onsemi.com
2


Part Number NHP160SF
Description Surface Mount Ultrafast Power Rectifier
Maker ON Semiconductor
PDF Download

NHP160SF Datasheet PDF






Similar Datasheet

1 NHP160SF Surface Mount Ultrafast Power Rectifier
ON Semiconductor





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z



Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy