NL7SZ19 Datasheet | onsemi

DATA SHEET .onsemi. 1-to-2 Decoder/ Demultiplexer The NL7SZ19 is a 1- to- 2 decoder. When the output enable (E) is Low, the device passes data at input A to outputs Y0 (true) and Y1 (plement). The NL7SZ19 can also be used as a 1- to- 2 demultiplexer. As a demultiplexer, data at input E is routed to either Y0 or Y1 depending on the state of A. The device operates over the voltage range from 1.65 V to 5.5 V. Features - Designed for 1.65 V to 5.5 V VCC Operation - 2.7 ns t PD at VCC = 5 V (Typ) - Inputs/Outputs Overvoltage Tolerant up to 5.5 V - IOFF Supports Partial Power Down Protection - Sink 32 m A at 5.0 V - Available in SC- 88, SC- 74 and UDFN6 Packages - Chip plexity < 100 FETs - - Q Suffix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements; AEC- Q100 Qualified and PPAP Capable - These Devices are Pb- Free, Halogen Free/BFR Free and are Ro HS pliant A1 6 Y0 SC- 88 DF SUFFIX CASE 419B SC- 74 CASE 318F- 05 UDFN6, 1.2x1.0, 0.4P CASE 517AA MARKING DIAGRAMS 6 XXXM G G XXX MG X, XXX = Specific Device Code = Date Code- = Pb- Free Package (Note: Microdot may be in either location) - Date Code orientation and/or position may vary depending upon manufacturing location. ORDERING INFORMATION See detailed ordering, marking and shipping information in the package dimensions section on page 6 of this data sheet. GND...