NLSX5012 Datasheet | onsemi

feature that the values of the VCC and VL supplies are independent. Design flexibility is maximized because VL can be set to a value either greater than or less than the VCC supply. In contrast, the majority of petitive auto sense translators have a restriction that the value of the VL supply must be equal to less than (VCC - 0.4) V. The NLSX5012 has high output current capability, which allows the translator to drive high capacitive loads such as most high frequency EMI filters. Another feature of the NLSX5012 is that each I/O_VLn and I/O_VCCn channel can function as either an input or an output. An Output Enable (EN) input is available to reduce the power consumption. The EN pin can be used to disable both I/O ports by putting them in 3-state which significantly reduces the supply current from both VCC and VL. The EN signal is referenced to the VL supply. Features - Wide VCC, VL Operating Range: 0.9 V to 4.5 V - VL and VCC are independent - VL may be greater than, equal to, or less than VCC - High 100 p F Capacitive Drive Capability - High- Speed with 140 Mb/s Guaranteed Date Rate for VCC, VL > 1.8 V - Low Bit- to- Bit Skew - Overvoltage Tolerant Enable and I/O Pins - Non- preferential Power- Up Sequencing - Power- Off Protection - Small packaging: UDFN8, SO- 8, Micro8 - These are Pb- Free Devices Typical Applications - Mobile Phones, PDAs, Other Portable Devices Important Information - ESD Protection for All Pins: - HBM (Human Body Model) > 8000 V http://onsemi. MARKING DIAGRAMS 8 1 UDFN8 MU SUFFIX CASE 517AJ AE M G VA = Specific Device Code M = Date Code G = Pb- Free Package 8 1 SO- 8 D SUFFIX CASE 751 8 SX5012 ALYWG G = Assembly...