NLU1GT86
MAXIMUM RATINGS
Symbol
Parameter
Value
Unit
VCC
VIN
VOUT
IIK
IOK
IO
ICC
IGND
TSTG
TL
TJ
MSL
DC Supply Voltage
DC Input Voltage
DC Output Voltage
DC Input Diode Current
DC Output Diode Current
DC Output Source/Sink Current
DC Supply Current Per Supply Pin
DC Ground Current per Ground Pin
Storage Temperature Range
Lead Temperature, 1 mm from Case for 10 Seconds
Junction Temperature Under Bias
Moisture Sensitivity
VIN < GND
VOUT < GND
−0.5 to +7.0
−0.5 to +7.0
−0.5 to +7.0
−20
±20
±12.5
±25
±25
−65 to +150
260
150
Level 1
V
V
V
mA
mA
mA
mA
mA
°C
°C
°C
FR
VESD
Flammability Rating
ESD Withstand Voltage
Oxygen Index: 28 to 34
Human Body Model (Note 2)
Machine Model (Note 3)
Charged Device Model (Note 4)
UL 94 V−0 @ 0.125 in
> 2000
> 150
N/A
V
ILATCHUP Latchup Performance Above VCC and Below GND at 125°C (Note 5)
±500
mA
Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality
should not be assumed, damage may occur and reliability may be affected.
1. Measured with minimum pad spacing on an FR4 board, using 10 mm−by−1 inch, 2 ounce copper trace no air flow.
2. Tested to EIA / JESD22−A114−A.
3. Tested to EIA / JESD22−A115−A.
4. Tested to JESD22−C101−A.
5. Tested to EIA / JESD78.
RECOMMENDED OPERATING CONDITIONS
Symbol
Parameter
VCC
VIN
VOUT
TA
Dt/DV
Positive DC Supply Voltage
Digital Input Voltage
Output Voltage
Operating Free−Air Temperature
Input Transition Rise or Fall Rate
VCC = 3.3 V ± 0.3 V
VCC = 5.0 V ± 0.5 V
Min Max Unit
1.65 5.5 V
0 5.5 V
0 5.5 V
−55
+125
°C
0 100 ns/V
0 20
www.onsemi.com
2
