NV25080WF Datasheet | onsemi

NV25080WF, NV25160WF EEPROM Serial 8/16-Kb SPI - Automotive Grade 1 in Wettable Flank UDFN8 Package Description The NV25080/25160 are EEPROM Serial 8/16- Kb SPI - Automotive Grade 1 devices internally organized as 1024x8/2048x8 bits. They feature a 32- byte page write buffer and support the Serial Peripheral Interface (SPI) protocol. The device is enabled through a Chip Select (CS) input. In addition, the required bus signals are a clock input (SCK), data input (SI) and data output (SO) lines. The HOLD input may be used to pause any serial munication with the NV25080/25160 device. These devices feature software and hardware write protection, including partial as well as full array protection. Features - Automotive AEC- Q100 Grade 1 (- 40°C to +125°C) Qualified - 10 MHz SPI patible - 1.8 V to 5.5 V Supply Voltage Range - SPI Modes (0,0) & (1,1) - 32- byte Page Write Buffer - Self- timed Write Cycle - Hardware and Software Protection - Block Write Protection - Protect 1/4, 1/2 or Entire EEPROM Array - Low Power CMOS Technology - 1,000,000 Program/Erase Cycles - 100 Year Data Retention - Industrial and Extended Temperature Range - 8- Pad Wettable Flank UDFN8 Packages - These Devices are Pb- Free, Halogen Free/BFR Free, and Ro HS pliant CS WP HOLD SCK NV25080WF NV25160WF VSS Figure 1. Functional Symbol .onsemi. UDFN8 (2x2) (Wettable Flank) MUW2 SUFFIX CASE 517AW UDFN8 (2x3) (Wettable Flank) MUW3 SUFFIX CASE...