Datasheet4U Logo Datasheet4U.com

NV25160WF - EEPROM

Download the NV25160WF datasheet PDF. This datasheet also covers the NV25080WF variant, as both devices belong to the same eeprom family and are provided as variant models within a single manufacturer datasheet.

Description

The NV25080/25160 are EEPROM Serial 8/16 Kb SPI

Automotive Grade 1 devices internally organized as 1024x8/2048x8 bits.

byte page write buffer and support the Serial Peripheral Interface (SPI) protocol.

Features

  • Automotive AEC.
  • Q100 Grade 1 (.
  • 40°C to +125°C) Qualified.
  • 10 MHz SPI Compatible.
  • 1.8 V to 5.5 V Supply Voltage Range.
  • SPI Modes (0,0) & (1,1).
  • 32.
  • byte Page Write Buffer.
  • Self.
  • timed Write Cycle.
  • Hardware and Software Protection.
  • Block Write Protection.
  • Protect 1/4, 1/2 or Entire EEPROM Array.
  • Low Power CMOS Technology.
  • 1,000,000 Program/Erase Cycles.
  • 100 Year.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (NV25080WF-ONSemiconductor.pdf) that lists specifications for multiple related part numbers.

📁 Similar Datasheet

Part Number Description Manufacturer
NV20FP G-LOW CURRENT HIGH VOLTAGE RECTIFIERS HV Component Associates
NV231 light weight DB Lectro
NV2M light weight DB Lectro

Other Datasheets by onsemi

Part Number Description
NV25160 EEPROM
NV25160LV EEPROM
NV25160MUW EEPROM
NV25128 EEPROM
NV25128MUW EEPROM

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
NV25080WF, NV25160WF EEPROM Serial 8/16-Kb SPI - Automotive Grade 1 in Wettable Flank UDFN8 Package Description The NV25080/25160 are EEPROM Serial 8/16−Kb SPI − Automotive Grade 1 devices internally organized as 1024x8/2048x8 bits. They feature a 32−byte page write buffer and support the Serial Peripheral Interface (SPI) protocol. The device is enabled through a Chip Select (CS) input. In addition, the required bus signals are a clock input (SCK), data input (SI) and data output (SO) lines. The HOLD input may be used to pause any serial communication with the NV25080/25160 device. These devices feature software and hardware write protection, including partial as well as full array protection. Features • Automotive AEC−Q100 Grade 1 (−40°C to +125°C) Qualified • 10 MHz SPI Compatible • 1.
Published: |