Datasheet4U Logo Datasheet4U.com

P1014AP - NCP1014AP

Description

Pin No.

223) 1 Pin No.

7, PDIP

Description This pin is connected to an external capacitor of typically 10 mF.

The natural ripple superimposed on the VCC participates to the frequency jittering.

Features

  • http://onsemi. com.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
P1010AT N-Channel MOSFET NIKO-SEM
P1010ATF N-Channel MOSFET NIKO-SEM
P10150D MOS Schottky Rectifier PFC Device Corporation
P10150E MOS Schottky Rectifier PFC Device Corporation
P101W PASSIVATED ASSEMBLED CIRCUIT ELEMENTS International Rectifier

Other Datasheets by onsemi

Part Number Description
P1014AP Self-Supplied Monolithic Switcher
P1014AP06 Self-Supplied Monolithic Switcher
P1014AP10 Self-Supplied Monolithic Switcher
P1010AP Self-Supplied Monolithic Switcher
P1010AP06 Self-Supplied Monolithic Switcher

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.DataSheet4U.com NCP1010, NCP1011, NCP1012, NCP1013, NCP1014 Self−Supplied Monolithic Switcher for Low Standby− Power Offline SMPS The NCP101X series integrates a fixed−frequency current−mode controller and a 700 V MOSFET. Housed in a PDIP−7, PDIP−7 Gull Wing, or SOT−223 package, the NCP101X offers everything needed to build a rugged and low−cost power supply, including soft−start, frequency jittering, short−circuit protection, skip−cycle, a maximum peak current setpoint and a Dynamic Self−Supply (no need for an auxiliary winding). Unlike other monolithic solutions, the NCP101X is quiet by nature: during nominal load operation, the part switches at one of the available frequencies (65 − 100 − 130 kHz). When the current setpoint falls below a given value, e.g.
Published: |