Datasheet4U Logo Datasheet4U.com

SBRB1045G - Schottky Power Rectifier

Features

  • epitaxial construction with oxide passivation and metal overlay contact. Ideally suited for use in low voltage, high frequency switching power supplies, free wheeling diodes, and polarity protection diodes. Features.
  • Guardring for Stress Protection.
  • Low Forward Voltage.
  • 175 C Operating Junction Temperature.
  • Epoxy Meets UL 94 V.
  • 0 @ 0.125 in.
  • Short Heat Sink Tab Manufactured-Not Sheared!.
  • SBRB and SBRD8 Prefixes for Automotive and Other.

📥 Download Datasheet

Datasheet Details

Part number SBRB1045G
Manufacturer onsemi
File Size 262.42 KB
Description Schottky Power Rectifier
Datasheet download datasheet SBRB1045G Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
SBRB30200CT Schottky Barrier Rectifier GOOD-ARK
SBR0 (SBR05 - SBR30) Standard Recovery 1-Phase Silicon Bridge Rectifier Assembly Semtech Corporation
SBR0120S3 (SBR0120S3 / SBR0120S5) Super barrier rectifier APD
SBR0120S5 (SBR0120S3 / SBR0120S5) Super barrier rectifier APD
SBR0130S3 (SBR0130S3 / SBR0130S5) Super barrier rectifier APD

Other Datasheets by onsemi

Part Number Description
SBRB1545CTG Power Rectifier
SBRB20200CTT4G Power Rectifier
SBRB2545CTG Power Rectifier
SBR80520LT1G Surface Mount Schottky Power Rectifier
SBR80520LT3G Surface Mount Schottky Power Rectifier

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
DATA SHEET www.onsemi.com Switch-mode Schottky Power Rectifier Surface Mount Power Package MBRB1045G, MBRD1045G, SBRB1045G, SBRD81045T4G This series of Power Rectifiers employs the Schottky Barrier principle in a large metal-to-silicon power diode. State-of-the-art geometry features epitaxial construction with oxide passivation and metal overlay contact. Ideally suited for use in low voltage, high frequency switching power supplies, free wheeling diodes, and polarity protection diodes. Features  Guardring for Stress Protection  Low Forward Voltage  175 C Operating Junction Temperature  Epoxy Meets UL 94 V−0 @ 0.
Published: |