900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf




  ON Semiconductor Electronic Components Datasheet  

SNUP2114UCMR6T1G Datasheet

Transient Voltage Suppressors

No Preview Available !

NUP2114 Series,
SNUP2114UCMR6T1G
Transient Voltage
Suppressors
Low Capacitance ESD Protection for
High Speed Data
The NUP2114 transient voltage suppressor is designed to protect
high speed data lines from ESD. Ultralow capacitance and high level
of ESD protection makes this device well suited for use in USB 2.0
applications.
Features
Low Capacitance 0.8 pF
S Prefix for Automotive and Other Applications Requiring Unique
Site and Control Change Requirements
AECQ101 Qualified and PPAP Capable SNUP2114
Low Clamping Voltage
Stand Off Voltage: 5 V
Low Leakage
ESD Rating of Class 3B (Exceeding 8 kV) per Human Body model
and Class C (Exceeding 400 V) per Machine Model
Protection for the Following IEC Standards:
IEC 6100042 Level 4 ESD Protection
UL Flammability Rating of 94 V0
These are PbFree Devices
Typical Applications
High Speed Communication Line Protection
USB 2.0 High Speed Data Line and Power Line Protection
Monitors and Flat Panel Displays
MP3
Gigabit Ethernet
Notebook Computers
Digital Video Interface (DVI) and HDMI
MAXIMUM RATINGS (TJ = 25C unless otherwise noted)
Rating
Symbol
Value
Unit
Operating Junction Temperature Range TJ 40 to +125 C
Storage Temperature Range
Tstg 55 to +150 C
Lead Solder Temperature
Maximum (10 Seconds)
TL 260 C
Human Body Model (HBM)
Machine Model (MM)
IEC 6100042 Contact
IEC6100042 Air
ESD
16000
400
8000
15000
V
Stresses exceeding Maximum Ratings may damage the device. Maximum
Ratings are stress ratings only. Functional operation above the Recommended
Operating Conditions is not implied. Extended exposure to stresses above the
Recommended Operating Conditions may affect device reliability.
See Application Note AND8308/D for further description of
survivability specs.
Semiconductor Components Industries, LLC, 2012
March, 2012 Rev. 1
1
http://onsemi.com
SOT553
CASE 463B
TSOP6
CASE 318G
VP
I/O I/O
VN
MARKING DIAGRAMS
P2MG
1G
SOT553
P2M MG
G
1
TSOP6
P2, P2M = Specific Device Code
M = Date Code
G = PbFree Package
(*Note: Microdot may be in either location)
PIN CONNECTIONS
VP 1
VN 2
NC 3
5 I/O
4 I/O
SOT553
I/O 1
6 I/O
VN 2
NC 3
5 VP
4 NC
TSOP6
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 4 of this data sheet.
Publication Order Number:
NUP2114/D
Free Datasheet http://www.datasheet4u.com/


  ON Semiconductor Electronic Components Datasheet  

SNUP2114UCMR6T1G Datasheet

Transient Voltage Suppressors

No Preview Available !

NUP2114 Series, SNUP2114UCMR6T1G
ELECTRICAL CHARACTERISTICS
(TA = 25C unless otherwise noted)
Symbol
Parameter
IPP
VC
VRWM
IR
VBR
IT
IF
VF
Ppk
C
Maximum Reverse Peak Pulse Current
Clamping Voltage @ IPP
Working Peak Reverse Voltage
Maximum Reverse Leakage Current @ VRWM
Breakdown Voltage @ IT
Test Current
Forward Current
Forward Voltage @ IF
Peak Power Dissipation
Max. Capacitance @ VR = 0 and f = 1.0 MHz
*See Application Note AND8308/D for detailed explanations of
datasheet parameters.
I
IF
VC VBR VRWM
IIRT VF
V
IPP
UniDirectional TVS
ELECTRICAL CHARACTERISTICS (TJ=25C unless otherwise specified)
Parameter
Symbol
Conditions
Min Typ Max Unit
Reverse Working Voltage
VRWM (Note 1)
5.0 V
Breakdown Voltage
VBR IT = 1 mA, (Note 2)
5.5 7.5
V
Reverse Leakage Current
IR VRWM = 5 V
1.0 mA
Clamping Voltage
VC IPP = 5 A (Note 3)
9.0 V
Clamping Voltage
VC IPP = 8 A (Note 3)
10 V
Maximum Peak Pulse Current
IPP 8x20 ms Waveform
12 A
Junction Capacitance
CJ VR = 0 V, f = 1 MHz between I/O Pins and GND
0.8 1.0 pF
Junction Capacitance
CJ VR = 0 V, f = 1 MHz between I/O Pins
0.5 pF
Clamping Voltage
VC @ IPP = 1 A (Note 4)
12 V
Clamping Voltage
VC Per IEC 6100042 (Note 5)
Figures 1 and 2
V
1. TVS devices are normally selected according to the working peak reverse voltage (VRWM), which should be equal or greater than the DC
or continuous peak operating voltage level.
2. VBR is measured at pulse test current IT.
3. Nonrepetitive current pulse (Pin 5 to Pin 2)
4. Surge current waveform per Figure 5.
5. Typical waveform. For test procedure see Figures 3 and 4 and Application Note AND8307/D.
6. Include S-prefix devices where applicable.
Figure 1. ESD Clamping Voltage Screenshot
Positive 8 kV Contact per IEC6100042
Figure 2. ESD Clamping Voltage Screenshot
Negative 8 kV Contact per IEC6100042
http://onsemi.com
2
Free Datasheet http://www.datasheet4u.com/


Part Number SNUP2114UCMR6T1G
Description Transient Voltage Suppressors
Maker ON Semiconductor
Total Page 6 Pages
PDF Download

SNUP2114UCMR6T1G Datasheet PDF

View PDF for Mobile








Similar Datasheet

1 SNUP2114UCMR6T1G Transient Voltage Suppressors
ON Semiconductor





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z

Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy