900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf




  ON Semiconductor Electronic Components Datasheet  

Z0103MARLRFG Datasheet

Silicon Bidirectional Thyristors

No Preview Available !

Z0103MA
Sensitive Gate Triacs
Series
Silicon Bidirectional Thyristors
Designed for use in solid state relays, MPU interface, TTL logic and
any other light industrial or consumer application. Supplied in an
inexpensive T O92 package which is readily adaptable for use in
automatic insertion equipment.
Features
OnePiece, InjectionMolded Package
Blocking Voltage to 600 V
Sensitive Gate Triggering in Four Trigger Modes (Quadrants) for all
possible Combinations of Trigger Sources, and especially for Circuits
that Source Gate Drives
All Diffused and Glassivated Junctions for Maximum Uniformity of
Parameters and Reliability
Improved Noise Immunity (dv/dt Minimum of 10 V/msec at 110°C)
Commutating di/dt of 1.6 A/msec at 110°C
High Surge Current of 8 A
These are PbFree Devices
MAXIMUM RATINGS (TJ = 25°C unless otherwise noted)
Rating
Symbol Value Unit
Peak Repetitive Off-State Voltage
(TJ = 40 to +125°C)(1)
Sine Wave 50 to 60 Hz, Gate Open
VDRM,
600
V
VRRM
On-State RMS Current
Full Cycle Sine Wave 50 to 60 Hz
(TC = 50°C)
Peak NonRepetitive Surge Current
One Full Cycle, Sine Wave 60 Hz
(TC = 110°C)
Circuit Fusing Considerations (t = 8.3 ms)
IT(RMS)
1.0
A
ITSM
8.0
A
I2t
0.35 A2s
Average Gate Power (TC = 80°C, t v 8.3 ms) PG(AV)
1.0
W
Peak Gate Current (t v 20 ms, TJ = +125°C)
IGM
1.0
A
Operating Junction Temperature Range
TJ
40 to °C
+125
Storage Temperature Range
Tstg
40 to °C
+150
Stresses exceeding Maximum Ratings may damage the device. Maximum
Ratings are stress ratings only. Functional operation above the Recommended
Operating Conditions is not implied. Extended exposure to stresses above the
Recommended Operating Conditions may affect device reliability.
1. VDRM and VRRM for all types can be applied on a continuous basis. Blocking
voltages shall not be tested with a constant current source such that the
voltage ratings of the devices are exceeded.
http://onsemi.com
TRIACS
1.0 AMPERE RMS
600 VOLTS
MT2
MT1
G
123
STRAIGHT LEAD
BULK PACK
1
2
3
BENT LEAD
TAPE & REEL
AMMO PACK
TO92 (TO226AA)
CASE 029
STYLE 12
MARKING DIAGRAM
Z0
10xMA
YWW G
G
1 23
x
= 3,7,9
Y
= Year
WW = Work Week
G
= PbFree Package
(*Note: Microdot may be in either location)
PIN ASSIGNMENT
1
Main Terminal 1
2
Gate
3
Main Terminal 2
© Semiconductor Components Industries, LLC, 2012
January, 2012Rev. 4
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 6 of this data sheet.
1
Publication Order Number:
Z0103MA/D
http://www.Datasheet4U.com


  ON Semiconductor Electronic Components Datasheet  

Z0103MARLRFG Datasheet

Silicon Bidirectional Thyristors

No Preview Available !

Z0103MA
THERMAL CHARACTERISTICS
Characteristic
Symbol
Max
Thermal Resistance, JunctiontoCase
RqJC
50
Thermal Resistance, JunctiontoAmbient
RqJA
160
Maximum Lead Temperature for Soldering Purposes for 10 Seconds
TL
260
Unit
°C/W
°C/W
°C
ELECTRICAL CHARACTERISTICS (TC = 25°C unless otherwise noted; Electricals apply in both directions)
Characteristic
Symbol
Min
Typ
OFF CHARACTERISTICS
Peak Repetitive Blocking Current
(VD = Rated VDRM, VRRM; Gate Open)
ON CHARACTERISTICS
TJ = 25°C
TJ = +125°C
IDRM, IRRM
Peak OnState Voltage
(ITM = "1.4 A Peak; Pulse Width v 2.0 ms, Duty Cycle v 2.0%)
Gate Trigger Current (Continuous dc)
(VD = 12 Vdc, RL = 30 W)
MT2(+), G(+)
MT2(+), G()
MT2(), G()
MT2(), G(+)
VTM
IGT
0.15
0.15
0.15
0.25
Latching Current (VD = 12 V, IG = 1.2 x IGT)
MT2(+), G(+) All Types
MT2(+), G() All Types
MT2(), G() All Types
MT2(), G(+) All Types
IL
Gate Trigger Voltage (Continuous dc)
(VD = 12 Vdc, RL = 30 W)
MT2(+), G(+) All Types
MT2(+), G() All Types
MT2(), G() All Types
MT2(), G(+) All Types
VGT
Gate NonTrigger Voltage
(VD = 12 V, RL = 30 W, TJ = 125°C)
All Four Quadrants
VGD
0.2
Holding Current
(VD = 12 Vdc, Initiating Current = 50 mA, Gate Open)
DYNAMIC CHARACTERISTICS
IH
Rate of Change of Commutating Current
(VD = 400 V, ITM = 0.84 A, Commutating dv/dt = 1.5 V/ms, Gate Open,
TJ = 110°C, f = 250 Hz, with Snubber)
Critical Rate of Rise of OffState Voltage (VD = 67% Rated VDRM,
Exponential Waveform, Gate Open, TJ = 110°C)
Repetitive Critical Rate of Rise of OnState Current, TJ = 125°C
Pulse Width = 20 ms, IPKmax = 15 A, diG/dt = 1 A/ms, f = 60 Hz
di/dt(c)
1.6
dv/dt
di/dt
10
30
Max Unit
5.0
mA
500
1.56
V
mA
3.0
3.0
3.0
5.0
mA
7.0
15
7.0
7.0
V
1.3
1.3
1.3
1.3
1.3
V
7.0
mA
A/ms
V/ms
20
A/ms
http://onsemi.com
2


Part Number Z0103MARLRFG
Description Silicon Bidirectional Thyristors
Maker ON Semiconductor
PDF Download

Z0103MARLRFG Datasheet PDF






Similar Datasheet

1 Z0103MARLRFG Silicon Bidirectional Thyristors
ON Semiconductor





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z



Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy