900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf






OPTEK

OP223 Datasheet Preview

OP223 Datasheet

Hermetic Infrared Emitting Diode

No Preview Available !

Hermetic Infrared Emitting Diode
OP123, OP124
OP223, OP224
Features:
Hermetically sealed package
Mechanically and spectrally matched to other OPTEK devices
Designed for direct mount to PCBoard
Description:
Each OP123 and OP124 device is a 935 nanometer (nm) high intensity gallium arsenide infrared emitting diode
(GaAs), mounted in a miniature hermetically sealed “pill” package with an enhanced temperature range and a high
power output. These devices are designed for direct mounting to PCBoards.
Each OP223 and OP224 device is an 890 nm gallium aluminum arsenide infrared emitting diode (GaAIAs),
mounted in a hermetically sealed “pill” package with an enhanced temperature range and a narrow irradiance
pattern that provides high on-axis intensity for excellent coupling efficiency. These devices offer significantly higher
power output than GaAs at equivalent drive currents and have a wavelength that is matched to silicon’s peak
response. Their small package size permits high device density mounting.
All these LEDs are mechanically and spectrally matched to the OP300 series, OP600 series and OP640 series
devices.
Please refer to Application Bulletins 208 and 210 for additional design information and reliability (degradation)
data, and to Application Bulletin 202 for pill-type soldering to PCBoard.
Applications:
Non-contact reflective object sensor
Assembly line automation
Machine automation
Machine safety
End of travel sensor
Door sensor
Ordering Information
Part LED Peak Total Beam
Number Wavelength
Angle
OP123
OP124
OP223
OP224
935 mm
890 mm
24°
1
2
DIMENSIONS ARE IN:
[MILLIMETERS]
INCHES
Pin #
1
2
LED
Anode
Cathode
Sensor
Collector
Emitter
RoHS
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
Issue A 05/07
Page 1 of 4




OPTEK

OP223 Datasheet Preview

OP223 Datasheet

Hermetic Infrared Emitting Diode

No Preview Available !

Hermetic Infrared Emitting Diode
OP123, OP124
OP223, OP224
Absolute Maximum Ratings (TA=25°C unless otherwise noted)
Storage Temperature Range
Operating Temperature Range
Reverse Voltage
Continuous Forward Current
Peak Forward Current (2µs pulse with 0.1% duty cycle)
Lead Soldering Temperature [1/16 inch (1.6 mm) from case for 5 seconds with soldering iron]
Power Dissipation
-65o C to +150o C
-65o C to +125o C
2.0 V
100 mA
1.0 A
260° C(1)(2)
150 mW(3)
Electrical Characteristics (TA = 25°C unless otherwise noted)
SYMBOL
PARAMETER
MIN TYP MAX UNITS
TEST CONDITIONS
Input Diode
EE
(3)
(APT)
Apertured Radiant Incidence
OP123
OP124
OP223
OP224
0.40 -
1.00 -
1.00 -
3.50 -
-
- mW/cm2 IF = 50 mA(4)
-
-
Forward Voltage
VF OP123
OP124
-
-
-
-
1.50
1.80
V IF = 50 mA
IR Reverse Current
Wavelength at Peak Emission
λP OP123, OP124
OP223, OP224
- - 100 µA VR= 2.0 V
- 935 -
- 890 -
nm
IF = 50 mA
IF = 10 mA
Spectral Bandwidth between Half Power
B Points OP123, OP124
OP223, OP224
- 50 -
- 80 -
nm
IF = 50 mA
IF = 10 mA
∆λP /T
Spectral Shift with Temperature
OP123, OP124
OP223, OP224
- +0.30
- +0.18
-
-
nm/°C IF = Constant
θHP Emission Angle at Half Power Points
Output Rise Time
tr OP123, OP124
OP223, OP224
Output Fall Time
tf OP123, OP124
OP223, OP224
- 24 - Degree IF = 50 mA
- 1000 -
- 500 -
- 500 -
- 250 -
ns
IF(PK)=100 mA, PW=10 µs, and
D.C.=10.0%
ns
Notes:
1. Refer to Application Bulletin 202 which reviews proper soldering techniques for pill-type devices.
2. No clean or low solids. RMA flux is recommended. Duration can be extended to 10 seconds maximum when flow soldering.
3. Derate linearly 1.50 mW/° C above 25° C.
4. For OP123, OP124, OP223 and OP224, EE(APT) is a measurement using a 0.031” (0.787 mm) diameter apertured sensor placed
0.50” (12.7 mm) from the measuring surface. EE(APT) is not necessarily uniform within the measured area.
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
Issue A 05/07
Page 2 of 4
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com


Part Number OP223
Description Hermetic Infrared Emitting Diode
Maker OPTEK
PDF Download

OP223 Datasheet PDF






Similar Datasheet

1 OP220 Dual Micropower Operational Amplifier
Maxwell
2 OP220 Dual Micropower Operational Amplifier
Analog Devices
3 OP221 Dual Low Power Operational Amplifier
Analog Devices
4 OP223 Hermetic Infrared Emitting Diode
OPTEK
5 OP223 Hermetic Infrared Emitting Diode
TT
6 OP224 Hermetic Infrared Emitting Diode
OPTEK
7 OP224 Hermetic Infrared Emitting Diode
TT
8 OP227 Dual / Low Noise / Low Offset Instrumentation Operational Amplifier
Analog Devices





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z



Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy