OPB688 Datasheet | OPTEK

Features : -  Photologic® output -  Four output options -  Mechanical switch replacement -  Printed circuit board mounting (OPB685 Series) -  2.5mm, 3-pin connector mates with Molex connector 5051 series housing and 4809 series terminal for OPB695 Series OPB685 Product Photo Here OPB695 Description : Each OPB685 and OPB695 series flag switch consists of an infrared emitting diode and a monolithic integrated circuit that incorporates a photodiode, a linear amplifier and a Schmitt trigger. A lever arm actuated flag interrupts the light beam, which switches the output between states that can readily drive logic gates. The OPB695 series is designed to easily snap mount into a 0.037” ± 0.001” (0.940 mm ± 0.025 mm) thick material with a rectangular opening of 0.320” ± 0.003” x 0.472” (8.13 mm x 11.99 mm) minimum. Insertion into the punched side of metal is remended. Devices in these series feature TTL/LSTTL patible logic level output that can drive up to 10 TTL loads over a voltage range from 4.5 V to 16 V. Customized lever arms and spring torques can be designed for specific applications for each of the devices. Custom electrical, wire, cabling and connectors are available. Contact your local representative or OPTEK for more information. Applications: - Mechanical switch replacement - Speed indication (tachometer) - Mechanical limit indication - Edge sensing Part LED Peak Number Wavelength OPB685 OPB686 OPB687 OPB695AZ OPB695BZ OPB695CZ OPB696AZ OPB696BZ 890 nm OPB696CZ OPB697AZ OPB697BZ OPB697CZ OPB698AZ OPB698BZ OPB698CZ Ordering Information Sensor...