900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf






OPTEK Technologies

OPB980 Datasheet Preview

OPB980 Datasheet

(OPB980 / OPB990) Photologic Slotted Optical Switches

No Preview Available !

Photologic® Slotted Optical Switch
OPB960, OPB970, OPB980, OPB990 Series
For parts built after 2004
www.DataSheet4U.com
Features:
Data rates to 250 kBaud
24” minimum 26 AWG wire leads
Choice of output configuration
Choice of opaque or IR-transmissive shell material
Choice of aperture
Choice of mounting configuration
L
NT
Product Photo Here
P
Description:
The OPB960, OPB970, OPB980 and OPB990 series of Photologic® photo integrated circuit switches provide
optimum flexibility for the design engineer. Building from a standard housing with a 0.125” (3.180 mm) wide slot, a
user can specify the type and polarity of TTL output, discrete shell material, aperture width and choice of mounting
configurations. OPB960 through OPB973 have 0.425” (10.795 mm) PCBoard leads with 0.320” (8.1 mm)
spacing. OPB980 through OPB993 have 24” (609 mm) 26 AWG wires.
All devices in this series exhibit performance over supply voltages ranging from 4.5 V to 16.0 V, and may be
specified as buffered or inverted with Totem-Pole or Open Collector output. Devices are also TTI/LSTTL
compatible and can drive up to 10 TTL loads.
Custom electrical, wire and cabling and connectors are available. Contact your local representative or OPTEK for
more information.
Applications:
Mechanical switch replacement
Speed and direction indication
Mechanical limit indication
Rotary encoders
Edge sensing
Sliding Door Automotive and Liftgate applications
Part Number Guide — OPB980 and OPB990 Series
OPB 9 X X X X X Z
OPTEK Assembly
Photologic™ Pnoto Integrated
Circuit Sensor Family
Discrete Housing Material:
6 — Base mount IR transmissive plastic discrete
shell with PCBoard lead termination
7 — Base mount opaque plastic discrete shell
with PCBoar lead termination
8 — Base mount IR transmissive plastic discrete
shell with wire termination
9 — Base mount opaque plastic discrete shell
with wire termination
Electrical Specifications:
0 — Buffered Totem-Pole Output
1 — Buffered Open-Collector Output
2 — Inverted Totem-Pole Output
3 — Inverted Open-Collector Output
All PCBoard Versions RoHS Compliant:
Z = Wire Version RoHS Compliant
Sensor Aperture:
1 = 0.010” [0.25 mm]
5 = 0.050” [1.27 mm]
Emitter Aperture:
1 = 0.010” [0.25 mm]
5 = 0.050” [1.27 mm]
Mounting Configurations:
L — Emitter side mounting tab only
N — No mounting tabs
P — Sensor-side mounting tab (Photologic side)
T — Two mounting tabs
RoHS
OPTEK Technology is TS 16949:2002 certified, any changes will be consistent with TS 16949:2002 procedures.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
Issue B.2 05/08
Page 1 of 7




OPTEK Technologies

OPB980 Datasheet Preview

OPB980 Datasheet

(OPB980 / OPB990) Photologic Slotted Optical Switches

No Preview Available !

Photologic® Slotted Optical Switch
OPB960, OPB970, OPB980, OPB990 Series
For parts built after 2004
www.DataSheet4U.com
OP960, OP970 Series
Color-Pin Description
Red-1
Anode
Black-2
Cathode
White-3
Vcc
Blue-4
Output
Green-5
Ground
OP980, OP990 Series
[ MILLIMETERS]
DIMENSIONS ARE IN:
INCHES
CONTAINS POLYSULFONE
To avoid stress cracking, we suggest using
ND Industries’ Vibra-Tite for thread-locking.
Vibra-Tite evaporates fast without causing structural
failure in OPTEK’s molded plastics.
Applies to: OPB460, OPB470, OPB480, OPB490.
Issue B.2 05/08
Page 2 of 7
OPTEK Technology is TS 16949:2002 certified, any changes will be consistent with TS 16949:2002 procedures.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com


Part Number OPB980
Description (OPB980 / OPB990) Photologic Slotted Optical Switches
Maker OPTEK Technologies
PDF Download

OPB980 Datasheet PDF






Similar Datasheet

1 OPB980 Optical Switches
TT
2 OPB980 (OPB980 / OPB990) Photologic Slotted Optical Switches
OPTEK Technologies
3 OPB981 Optical Switches
TT
4 OPB982 Optical Switches
TT
5 OPB983 Optical Switches
TT





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z



Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy