Datasheet4U Logo Datasheet4U.com

FHG-1214 - (FHG-1000 Series) SCREW GEAR FLOWMETER

Download the FHG-1214 datasheet PDF. This datasheet also covers the FHG-1112 variant, as both devices belong to the same (fhg-1000 series) screw gear flowmeter family and are provided as variant models within a single manufacturer datasheet.

Key Features

  • a highresolution sin/cos-interpolator, which is adjustable with 10 different resolution factors. Furthermore, a programmable signal filter is available as well, which can offset unwanted negative pulse sequences up to an adjustable degree. In addition, a signal for a separate direction detection, e. g. in case of a 1-channel evaluation, is provided by the electronics. Optionally, this output can be used for the detection of excess flows and temperatures. Electronics Free Datasheet http://www. da.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (FHG-1112_OmegaEngineering.pdf) that lists specifications for multiple related part numbers.

Datasheet Details

Part number FHG-1214
Manufacturer Omega Engineering
File Size 219.44 KB
Description (FHG-1000 Series) SCREW GEAR FLOWMETER
Datasheet download datasheet FHG-1214 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer

Other Datasheets by Omega Engineering

Part Number Description
FHG-1212 (FHG-1000 Series) SCREW GEAR FLOWMETER
FHG-1222 (FHG-1000 Series) SCREW GEAR FLOWMETER
FHG-1224 (FHG-1000 Series) SCREW GEAR FLOWMETER
FHG-1112 (FHG-1000 Series) SCREW GEAR FLOWMETER
FHG-1114 (FHG-1000 Series) SCREW GEAR FLOWMETER

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
SCREW GEAR FLOWMETER For High Viscosity Liquids FHG-1000 Series A U Pulsation-Free Measurement U Lowest Pressure Loss for High Viscosity U Short Response Time U Up to 1,000,000 Centistoke Viscosity U High Accuracy and Wide Ranges F FHG-1000 flowmeters measure the flow rate based on the screw pump principle. A pair of rotors fitted precisely into the housing constitutes the measuring element. An integrated gear and non-contact signal pick-up system detects the rotations of the measuring element and converts them to digital pulses. Together with the housing walls, the rotor edges form closed measuring chambers in which the fluid is transported from the inlet to the outlet side.