D2HW-A201D Datasheet | OMRON

D2HW Sealed Ultra Subminiature Basic Switch Smallest sealed snap-action switch in the industry with a very long stroke for reliable ON/OFF action O The case dimensions are 78% of conventional models, contributing to down-sizing of D mechanical modules. O Extra-long stroke even without levers. (OT reference value: 1.4 mm). O Made of environmentally-friendly materials. All models are lead-free, including molded lead wire models. Ro HS pliant Model Number Legend D2HW - 1 2 3 4 5 - 6 - 7 1. Mounting Structure A : Without posts (base-mounting) BR : Long post on right BL : Long post on left C : M3-screw mounting models ER : Short post on right EL : Short post on left 2. Raitings 2 : 5 VDC 1m A to 12 VDC 2A 3. Actuator 0 : Pin plunger 1 : Hinge lever 2 : Long hinge lever 3 : Simulated roller lever 4 : Hinge roller lever 5 : Straight leaf lever 6 : Leaf lever 7 : Simulated roller leaf lever 8 : Long leaf lever 4. Contact form 1 : SPDT 2 : SPST-NC (Molded lead wire models only) 3 : SPST-NO (Molded lead wire models only) 5. Terminals D, DS : PCB terminals (Straight) DR, DRS : PCB Terminals (Right-angled) DL, DLS : PCB Terminals (Left-angled) H, HS : Solder terminals M, MS : Molded lead wires downwards MR, MRS : Molded lead wires on right-side ML, MLS : Molded lead wires on left-side Note. UL/c UL approved versions are available. In this case, a "S" will be added to the end of the model number. The Lead wire is a UL approved wire (AWG24, UL1007). 6. Special Specification 7. Special Industry Specification D2HW Sealed Ultra Subminiature Basic Switch List of Models OPCB-mounted Models Actuator Pin...