• Power window
• Electric sunroof
• Intermittent Windshield wiper
• Power door lock
(All dimensions in mm)
• Power seat
• Electric wing mirror
• Power radio aerial
• Washer pump
Omron PCB relays may be mounted in any
convenient location that is dry and not exposed to
excessive dust, S02, H2S or organic gases.
All Omron PCB relays may be oriented in any
desired direction. Whenever possible, however,
care should be taken that they are not subjected
to vibration along the direction of contact
TERMINAL ARRANGEMENT /
If several relays are to be mounted on a single
printed circuit board, they should be given at least
3mm clearance on all sides as shown in the
Proper spacing is necessary to dissipate heat build–up
from individual relays. Other than this, there are normally
no restrictions depending on application. Please contact
Omron for details.
Cat. No. C–G8QN–001 In the interest of product improvement, specifications are subject to change without notice.
LEADERS IN ELECTRONIC COMPONENTS
OMRON Electronics Ltd.
1, Apsley Way,
London NW2 7HF
Phone: (0181) 450 4646 Fax: (0181) 450 8087