Datasheet4U Logo Datasheet4U.com

K8AB-VW - Single-phase Voltage Relay

Features

  • m DIP switch settings: SW3 and SW4 both ON or both OFF.

📥 Download Datasheet

Datasheet Details

Part number K8AB-VW
Manufacturer OMRON
File Size 1.02 MB
Description Single-phase Voltage Relay
Datasheet download datasheet K8AB-VW Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
K8A1215EBC 512Mb C-die NOR FLASH Samsung semiconductor
K8A1215ETC 512Mb C-die NOR FLASH Samsung semiconductor
K8A1215EZC 512Mb C-die NOR FLASH Samsung semiconductor
K8A1315EBC 512Mb C-die NOR FLASH Samsung semiconductor
K8A1315ETC 512Mb C-die NOR FLASH Samsung semiconductor

Other Datasheets by OMRON

Part Number Description
K8AB-VS Single-phase Voltage Relay
K8AB-AS Single-phase Current Relay
K8AB-PH Phase-sequence Phase-loss Relay
K8AB-PM Three-phase Phase-sequence Phase-loss Relay
K8AB-PW Three-phase Voltage Relay

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Single-phase Voltage Relay K8AB-VW CSM_K8AB-VW_DS_E_3_1 Ideal for voltage monitoring for industrial facilities and equipment. • Monitor for overvoltages and undervoltages simultaneously. Separate settings and outputs supported for overvoltages and undervoltages. • Manual resetting and automatically resetting supported by one Relay. • Pre-alarm Monitoring Mode. • Two SPDT output relays, 6 A at 250 VAC (resistive load). • Process control signal (0 to 10 V) and current splitter input supported. • Output status can be monitored using LED indicator. • Input frequency of 40 to 500 Hz supported. • Inputs are isolated from the power supply. Refer to Safety Precautions for the K8AB Series. Refer to page 9 for the Q&A section. Model Number Structure ■ Model Number Legend K8AB-@@ 1 2 3 4 1.
Published: |