MY
Miniature Power Relays: MY2
Refer to the standards certifications and compliance
section of your OMRON website for the latest
information on certified models.
Ordering Information 8IFOZPVSPSEFS
TQFDJGZUIFSBUFEWPMUBHF
Classification
Model
Rated voltage (V)
Standard products
Made-to-order items
Standard models
MY2
12, 24, 100/110, or 200/220 VAC
12, 24, 48, or 100/110 VDC
110/120 or 220/240 VAC
Models with built-in operation indicators
MY2N
12, 24, 100/110, 110/120, 200/220, or 220/240 VAC
12, 24, 48, or 100/110 VDC
Models with built-in diodes
MY2-D
12, 24, or 100/110 VDC
48 VDC
Models with built-in diodes and operation
indicators
MY2N-D2
12, 24, 48, or 100/110 VDC
Models with built-in CR circuits
MY2-CR
100/110 or 200/220 VAC
110/120 or 220/240 VAC
Models with built-in CR circuits and operation
indicators
MY2N-CR
100/110 or 200/220 VAC
110/120 or 220/240 VAC
Note: 1. Ask your OMRON representative for details on the time required to deliver made-to-order products.
2. Ask your OMRON representative for details on product specifications and the ability to manufacture products with voltages other than
the above coil specifications.
3. The above models and specifications are new versions in the MY Series.
4. Except for MY2(N)-CR Relays with the above voltage specifications, all Relays have a height of 53 mm or less.
If Mounting Brackets are required, refer to page 33 for selection information.
Ratings and Specifications
Ratings
Operating Coils (Standard Models)
Item
Rated
voltage (V)
Rated current (mA)
50 Hz
60 Hz
Coil resistance
(Ω)
Coil inductance (H)
Armature
OFF
Armature
ON
Must-
operate
voltage (V)
Must-
release
voltage (V)
Maximum
voltage (V)
Power consumption
(VA, W)
12
106.5
91
46
0.17
0.33
24
53.8
46
180
0.69
1.3
Approx. 1.0 to 1.2
(at 60 Hz)
100/110
AC
110/120
200/220
220/240
11.7/12.9
9.9/10.8
6.2/6.8
4.8/5.3
10/11
8.4/9.2
5.3/5.8
4.2/4.6
3,750
4,430
12,950
18,790
14.54
19.2
54.75
83.5
24.6
32.1
94.07
136.4
30% min. *2
80% max. *1
110% of rated
voltage
Approx. 0.9 to 1.1
(at 60 Hz)
12
72.7
165
0.73
1.37
24
36.3
DC
48
17.6
662
2,725
3.2
5.72
10.6
21.0
10% min. *2
Approx. 0.9
100/110
8.7/9.6
11,440
45.6
86.2
Note: 1. The rated current and coil resistance are measured at a coil temperature of 23°C with tolerances of +15%/−20% for the AC rated current and ±15% for the
DC coil resistance.
2. The AC coil resistance and inductance values are reference values only (at 60 Hz).
3. Operating characteristics were measured at a coil temperature of 23°C.
4. The maximum voltage capacity was measured at an ambient temperature of 23°C.
*1. There is variation between products, but actual values are 80% max.
To ensure operation, apply at least 80% of the rated value (at a coil temperature of +23° C).
*2. There is variation between products, but actual values are 30% minimum for AC and 10% minimum for DC. To ensure release, use a value that is lower than the
specified value.
Contact Ratings
Item
Load Resistive load
Inductive load
(cos φ = 0.4, L/R = 7 ms)
Rated load
5 A at 220 VAC 2 A at 220 VAC
5 A at 24 VDC 2 A at 24 VDC
Rated carry current
5A
Maximum contact voltage 250 VAC, 125 VDC
Maximum contact current 5 A
Contact configuration
DPDT
Contact structure
Single
Contact materials
Ag
Item
Type
Standard
models
Model with built-in operation
indicator, diode, or CR circuit
Ambient
operating
temperature*1
−55 to 70°C
−55 to 60°C*2
Ambient
operating
humidity
5% to 85%
*1. With no icing or condensation.
*2. This limitation is due to the diode junction temperature and elements used.
2
