OB3639A Datasheet | On-Bright

DESCRIPTION OB3639A is an offline LED lighting controller with high power factor, low THD and high constant current (CC) precision. It can achieve low system cost for an isolated lighting application by primary side control in a single stage converter. It significantly simplifies the LED lighting system design by eliminating the secondary side feedback ponents and the opto-coupler. The proprietary CC control is used and the system can achieve high power factor with constant on-time control. Quasi-resonant (QR) operation and clamping frequency greatly improve the system efficiency. The advanced start-up technology is used to meet the start-up time requirement (<0.5s). The constant output current is pensated for tolerance of transformer inductance variation. And the line pensation and load pensation are built in OB3639A for high precisely constant output current control. OB3639A offers prehensive protection coverage with auto-recovery features including programmable VIN foldback, programmable VIN OVP, programmable thermal foldback, LED open loop protection, LED short circuit protection, cycle-by-cycle current limiting, built-in leading edge blanking, VDD under voltage lockout (UVLO), etc. OB3639A is offered in SOP-8 package. FEATURES - High PF (>0.9) - Low THD (<10%) - Programmable VIN foldback - Programmable VIN OVP - Programmable thermal foldback - High precision constant current - Fast start-up (<0.5s) - Low system cost and high efficiency - Quasi-resonant operation - Programmable CC regulation - Built-in line/load pensation - LED short circuit protection - LED open loop protection - Cycle-by-cycle current limiting - VDD over voltage protection - Up to 80W application APPLICATIONS - LED lighting ©On-Bright Electronics Confidential -1- Preliminary Datasheet OB_DOC_DS_3639A00 High PF, Low THD Offline LED Lighting Controller TYPICAL APPLICATION Application Schematic 1: Vin_ovr_min/Vin_bro≤3.4 Vin ~ AC + VLED + CO NAUX GATE...