Datasheet4U Logo Datasheet4U.com

NCP2809A Datasheet 135mw Stereo Headphone Power Amplifier

Manufacturer: onsemi

Overview: NCP2809 Series NOCAPt 135 mW Stereo Headphone Power Amplifier The NCP2809 is a cost−effective stereo audio power amplifier capable of delivering 135 mW of continuous average power per channel into 16 W loads. The NCP2809 audio power amplifier is specifically designed to provide high quality output power from low supply voltage, requiring very few external components. Since NCP2809 does not require bootstrap capacitors or snubber networks, it is optimally suited for low−power portable systems. NCP2809A has an internal gain of 0 dB while specific external gain can externally be set with NCP2809B. If the application allows it, the virtual ground provided by the device can be connected to the middle point of the headset (Figure 1). In such case, the two external heavy coupling capacitors typically used can be removed. Otherwise, you can also use both outputs in single ended mode with external coupling capacitors (Figure 43). Due to its excellent Power Supply Rejection Ratio (PSRR), it can be directly connected to the battery, saving the use of an LDO.

This datasheet includes multiple variants, all published together in a single manufacturer document.

Key Features

  • 135 mW to a 16 W Load from a 5.0 V Power Supply.
  • Excellent PSRR (85 dB Typical): Direct Connection to the Battery.
  • “Pop and Click” Noise Protection Circuit.
  • Ultra Low Current Shutdown Mode.
  • 2.2 V.
  • 5.5 V Operation.
  • Outstanding Total Harmonics Distortion + Noise (THD+N): Less than 0.01%.
  • External Turn.
  • on and Turn.
  • off Configuration Capability.
  • Thermal Overload Protection Circuitry.
  • NCP2809B avai.

NCP2809A Distributor & Price

Compare NCP2809A distributor prices and check real-time stock availability from major suppliers. Prices and inventory may vary by region and order quantity.