datasheet4u.com

900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf





Opto 22
Opto 22

MP120D4 Datasheet Preview

MP120D4 Datasheet

Soild State Relay

No Preview Available !

MP120D4 pdf
Solid-State Relays
Features
Rugged, epoxy encapsulation construction
4,000 volts of optical isolation
www.datasheet4u.com
Subjected to full load test and six times the rated
current surge before and after encapsulation
Unique heat-spreader technology
UL and CSA recognized*
Description
Opto 22 Power
Series SSR
Overview
In 1974, Opto 22 introduced the first liquid epoxy-filled line of
power solid-state relays (SSR). This innovation in SSR design greatly
improved the reliability and reduced the cost of manufacturing. At
that time, we also incorporated into our manufacturing process
100% testing under full load conditions of every relay we produced.
By 1978, Opto 22 had gained such a reputation for reliability that
we were recognized as the world’s leading manufacturer of solid-
state relays. Through continuous manufacturing improvements and
the same 100% testing policy established over 30 years ago,
Opto 22 is still recognized today for the very high quality and
reliability of all our solid-state relays.
Opto 22 offers a complete line of SSRs, from the rugged 120/240/
380-volt AC Series to the small footprint MP Series, designed for
mounting on printed circuit boards. All Opto 22 SSRs feature 4,000
volts of optical isolation and are UL and CSA recognized.* The
innovative use of room-temperature liquid epoxy encapsulation,
coupled with Opto 22’s unique heat-spreader technology, are key to
mass producing the world’s most reliable solid state relays.
Every Opto 22 solid state relay is subjected to full load test and six
times the rated current surge both before and after encapsulation.
This double testing of every part before it leaves the factory means
you can rely on Opto 22 solid state relays. All Opto 22 SSRs are
guaranteed for life.
Part Numbers
Part Description Part Description
120A10
120A25
240A10
240A25
240A45
120D3
120D10
120D25
120D45
240D3
240D10
240Di10
240D25
240Di25
240D45
240Di45
380D25
380D45
120 VAC, 10 Amp, AC Control
480D10-12
120 VAC, 25 Amp, AC Control
480D15-12
240 VAC, 10 Amp, AC Control
480D25-12
240 VAC, 25 Amp, AC Control
480D45-12
240 VAC, 45 Amp, AC Control
575D15-12
120 VAC, 3 Amp, DC Control
575D45-12
120 VAC, 10 Amp, DC Control
575Di45-12
120 VAC, 25 Amp, DC Control
120 VAC, 45 Amp, DC Control
Z120D10
240 VAC, 3 Amp, DC Control
Z240D10
240 VAC, 10 Amp, DC Control
MP120D2
or P120D2
240 VAC, 10 Amp, DC Control, with LED Indicators MP120D4
240 VAC, 25 Amp, DC Control
or P120D4
240 VAC, 25 Amp, DC Control, with LED Indicators MP240D2
240 VAC, 45 Amp, DC Control
or P240D2
240 VAC, 45 Amp, DC Control, with LED Indicators
MP240D4
or P240D4
380 VAC, 25 Amp, DC Control
MP380D4
380 VAC, 45 Amp, DC Control
480 VAC, 10 Amp, DC Control, Transient Proof
480 VAC, 15 Amp, DC Control, Transient Proof
480 VAC, 25 Amp, DC Control, Transient Proof
480 VAC, 45 Amp, DC Control, Transient Proof
575 VAC, 15 Amp, DC Control, Transient Proof
575 VAC, 45 Amp, DC Control, Transient Proof
575 VAC, 45 Amp, DC Control, Transient Proof,
with LED Indicators
Z Model, 120 VAC, 10 Amp, DC Control
Z Model, 240 VAC, 10 Amp, DC Control
120 VAC, 2 Amp, DC Control.
P model is low profile.
120 VAC, 4 Amp, DC Control.
P model is low profile.
240 VAC, 2 Amp, DC.
P model is low profile.
240 VAC, 4 Amp, DC.
P model is low profile.
380 VAC, 4 Amp, DC
* UL recognition is pending for Power Series SSRs with LED indicators.
Contact Opto 22 Product Support for current UL information.
Opto 22 • 43044 Business Park Drive • Temecula, CA 92590-3614 • www.opto22.com
SALES 800-321-6786 • 951-695-3000 • FAX 951-695-3095 • sales@opto22.com • SUPPORT 800-835-6786 • 951-695-3080 • FAX 951-695-3017 • support@opto22.com
© 2006–2008 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.
PAGE
1



Opto 22
Opto 22

MP120D4 Datasheet Preview

MP120D4 Datasheet

Soild State Relay

No Preview Available !

MP120D4 pdf
Solid-State Relays
Power Series SSRs
www.datasheet4u.com
Opto 22 provides a full range of Power
Series relays with a wide variety of
voltage (120–575 volts) and current
options (3–45 amps). All Power Series
relays feature 4,000 volts of optical
isolation and have a high PRV rating.
Some Power Series relays include
built-in LEDs to indicate operation.
DC Series
The DC Series delivers isolated DC control to large OEM customers
worldwide.
AC Series
The AC Series offers the ultimate in solid state reliability. All AC
Power Series relays feature a built-in snubber and zero voltage turn
on. Transient-proof models offer self protection for noisy electrical
environments.
Z Series SSRs
The Z Series employs a unique heat
transfer system that makes it possible
for Opto 22 to deliver a low-cost, 10-
amp, solid state relay in an all-plastic
case. The push-on, tool-free quick-
connect terminals make the Z Series
ideal for high-volume OEM
applications.
Printed Circuit Series SSRs
Opto 22’s Printed Circuit Series allows
OEMs to easily deploy solid state
relays on printed circuit boards. Two
unique packages are available, both
of which will switch loads up to four
amps.
MP Series
The MP Series packaging is designed with a minimum footprint to
allow maximum relay density on the printed circuit board.
P Series
The P Series power relays provide low-profile [0.5 in. (12.7 mm)]
center mounting on printed circuit boards.
Specifications
(all Power Series models)
• 4,000 V optical isolation, input to output
• Zero voltage turn-on
• Turn-on time: 0.5 cycle maximum
• Turn-off time: 0.5 cycle maximum
• Operating frequency: 25 to 65 Hz
(operates at 400 Hz with six times off-state leakage)
• Coupling capacitance, input to output: 8 pF maximum
• Hermetically sealed
• DV/DT Off-state: 200 volts per microsecond
• DV/DT commutating: snubbed for rated current at
0.5 power factor
• UL recognized*
• CSA certified
• CE component
• Torque specs for screws: Control terminals, 18 in/lb
Field terminals, 6 in/lb
Safety Cover for Power Series SSRs
A plastic safety cover (Opto 22 part number SAFETY COVER) is
optionally available for Opto 22 Power Series SSRs. The safety cover
reduces the chance of accidental contact with relay terminals, while
providing access holes for test instrumentation.
An optional plastic safety cover can be installed on a Power Series SSR.
* UL recognition is pending for Power Series SSRs with LED indicators.
Contact Opto 22 Product Support for current UL information.
PAGE
2
Opto 22 • 43044 Business Park Drive • Temecula, CA 92590-3614 • www.opto22.com
SALES 800-321-6786 • 951-695-3000 • FAX 951-695-3095 • sales@opto22.com • SUPPORT 800-835-6786 • 951-695-3080 • FAX 951-695-3017 • support@opto22.com
© 2006–2008 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.


Part Number MP120D4
Description Soild State Relay
Maker Opto 22
Total Page 18 Pages
PDF Download
MP120D4 pdf
MP120D4 Datasheet PDF
[partsNo] view html
View PDF for Mobile








Similar Datasheet

1 MP120D2 Solid-State Relays OPTO22
OPTO22
MP120D2 pdf
2 MP120D3 Zero Cross0.02-3 Amps RMS12-140 Volts RMS3-32 Control - Volts DC Crydom Corporation
Crydom Corporation
MP120D3 pdf
3 MP120D4 Solid-State Relays OPTO22
OPTO22
MP120D4 pdf
4 MP120D4 Soild State Relay Opto 22
Opto 22
MP120D4 pdf
5 MP120Dxx Soild State Relay Opto 22
Opto 22
MP120Dxx pdf





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z

Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy