OXCB950 Datasheet | Oxford Semiconductor

.. Features - - OXCB950 DATASHEET Integrated High Performance UART Cardbus / 3.3v PCI interface DS_B005A_00 - - - - - - - - - - Arbitrary trigger levels for receiver and transmitter FIFO interrupts and automatic in-band and out-ofband flow control Infra-red (IrDA) receiver and transmitter operation 9-bit data framing as well as 5,6,7 and 8 Global Interrupt Status and readable FIFO levels to facilitate implementation of efficient device drivers Detection of bad data in the receiver FIFO Operation via IO or memory mapping. 2 multi-purpose I/O pins which can be configured as interrupt input or ‘wake-up’ pins Auto-detection of optional MicrowireTM EEPROM, to reconfigure device 3.3V operation 100 pin TQFP package - - - - - - - Single high-performance UART channel Cardbus/3.3v PCI pliant, single-function target controller. Fully pliant to PC Card Standards, and PCI Bus Specification 2.2, Power Management 1.0 Function access to preconfigure the UART prior to handover to generic device drivers UART fully software patible with 16C550-type devices. Baud rates up to 15Mbps in asynchronous mode and 60Mbps in external 1x clock mode 128-byte deep FIFO per transmitter and receiver Flexible clock prescaler from 1 to 31.875 Automated in-band flow control using programmable Xon/Xoff in both directions Automated out-of-band flow control using CTS#/RTS# and/or DSR#/DTR# DESCRIPTION The OXCB950 is a single chip UART solution for either cardbus or PCI-based serial add-in cards. It is a single function device, offering memory or IO mapped access to the ultra-high performance 950-type UART. This UART is the fastest available PC-patible UART, offering data rates up to 15Mbps and 128-byte deep transmitter and receiver FIFOs. The deep FIFOs reduce CPU overhead...