OXCFU950
Overview
FEATURES
- -
- USB/UART multi-function 16-bit PC Card device Host interface
- 16-bit PC Card (PCMCIA revision 8.0) pliant
- pact Flash/CF+ (revision 3.0) pliant USB host controller
- Supports USB 2.0/1.1 full-speed pliant (12 Mbps) & low speed (1.5 Mbps) devices
- 8-Kbyte data buffer
- Integrated OHCI-like controller supported by Oxford Semiconductor drivers
- Supports control, bulk, interrupt & isochronous transfers
- Supports USB PORT_OVER_CURRENT & PORT_POWER signals via MIO pins Integrated USB PHY transceivers Flexible OX16C95x-based UART
- Supports 450 up to 950 (fully programmable)
- Baud rates up to 12 Mbps
- 128-byte deep transmit/receive FIFO
- Software-patible with standard 16C550
- Readable FIFO levels
- 9-bit data framing as well as 5,6,7 & 8
- Detection of bad data in the receiver FIFO Optional wakeup from low-power mode Automated in-band flow control using programmable Xon/Xoff characters
- Automated hardware flow control using CTS#/RTS# & DSR#/DTR#
- Integral...
