SMDJ13 Datasheet | PACELEADER

FEATURES Glass passivated chip 3000 W peak pulse power capability with a 10/1000 us waveform, repetitive rate (duty cycle):0.01 % Low leakage Uni and Bidirectional unit Excellent clamping capability Very fast response time SMC/DO-214AB .108(2.75) .128(3.25) .220(5.59) .245(6.22) .260(6.60) .280(7.11) .006(.152) .012(.305) .079(2.00) .103(2.62) .030(0.76) .050(1.27) .002(.051) .008(.203) .305(7.75) .320(8.13) Dimensions in inches and (millimeters) MECHANICAL DATA Case Molded plastic Epoxy UL 94V-0 rate flame retardant Lead: Solderable per MIL-STD-750, Method 2026 Polarity Color band denotes positive end (cathode) except bidirectional Mounting position: Any RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25o C ambient temperature unless otherwise specified Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20% Parameter Peak power dissipation with a 10/1000μs waveform Peak pulse current wih a 10/1000μs waveform Power dissipation on infinite heatsink at TL = 75 °C Peak forward surge current, 8.3 ms single half sinewave unidirectional only(1) Maximum instantaneous forward voltage at 100 A for unidirectional only(2) Operating junction and storage temperature range Symbol PPP IPP PD IFSM Value Minimum 3000 See Next Table VF TJ, TSTG 3.5/5.0 - 55 to +150 UNIT Watts Amps. Watts Amps. Volts °C Note: (1) Measured on 8.3 ms single half sine-wave or equivalent square wave, duty cycle = 4 pulses per minute maximum. (2) VF= 3.5V on SMDJ5.0 thru SMDJ90A devices and VF= 5.0V on SMDJ100 thru SMDJ440A devices. .paceleader.tw SMDJ5.0 thru SMDJ44 0CA SURFACE MOUNT TRANSIENT VOLTAGE...