SMDJ5.0 thru SMDJ44 0CA
SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR
REVERSE VOLTAGE 6.8 to 520 Volts PEAK PULSE POWER 3000 WATTS
FEATURES
Glass passivated chip
3000 W peak pulse power capability
with a 10/1000 us waveform, repetitive
rate (duty cycle):0.01 %
Low leakage
Uni and Bidirectional unit
Excellent clamping capability
Very fast response time
SMC/DO-214AB
.108(2.75)
.128(3.25)
.220(5.59)
.245(6.22)
.260(6.60)
.280(7.11)
.006(.152)
.012(.305)
.079(2.00)
.103(2.62)
.030(0.76)
.050(1.27)
.002(.051)
.008(.203)
.305(7.75)
.320(8.13)
Dimensions in inches and (millimeters)
MECHANICAL DATA
Case Molded plastic
Epoxy UL 94V-0 rate flame retardant
Lead: Solderable per MIL-STD-750,
Method 2026
Polarity Color band denotes positive end (cathode)
except bidirectional
Mounting position: Any
RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25oC ambient temperature unless otherwise specified
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%
Parameter
Peak power dissipation with a 10/1000μs waveform
Peak pulse current wih a 10/1000μs waveform
Power dissipation on infinite heatsink at TL = 75 °C
Peak forward surge current, 8.3 ms single half sine-
wave unidirectional only(1)
Maximum instantaneous forward voltage at 100 A
for unidirectional only(2)
Operating junction and storage temperature range
Symbol
PPP
IPP
PD
IFSM
Value
Minimum 3000
See Next Table
6.0
300
VF
TJ, TSTG
3.5/5.0
–55 to +150
UNIT
Watts
Amps.
Watts
Amps.
Volts
°C
Note:
(1) Measured on 8.3 ms single half sine-wave or equivalent square wave, duty cycle = 4 pulses per minute maximum.
(2) VF= 3.5V on SMDJ5.0 thru SMDJ90A devices and VF= 5.0V onSMDJ100 thru SMDJ440A devices.
www.paceleader.tw
1
