PR4403 - 0.9V Boost Driver

PREMA

General Description

test LS Vout n.c.

81 Vcc 7 n.c.

Output voltage, LED connection Connect both pin 3 and 6!

Key Features

only one 1.2 V battery cell needed.
250 mA peak output current.
low number of external components.
battery deep discharge protection.
adjustable light threshold for switching on.

📥 Download Datasheet

PR4403 0.9v boost driver by PREMA - Datasheet Preview

Datasheet Details

Part number	PR4403
Manufacturer	PREMA
File Size	517.45 KB
Description	0.9V Boost Driver
Datasheet	PR4403 Datasheet

📁 Similar Datasheet

Part Number	Description	Manufacturer
PR42	Hybrid Motor	Nippon Pulse
PR4538	LED display interface circuit	Ledasic
PR49MF11NIPF	Non-Zero Cross type DIP 8pin Triac output SSR	Sharp
PR49MF11NSZF	Non-Zero Cross type DIP 8pin Triac output SSR	Sharp

Other Datasheets by PREMA

Part Number	Description
PR4401	(PR4401 / PR4402) 0.9V Boost Driver
PR4402	(PR4401 / PR4402) 0.9V Boost Driver
PR4404	LED DRIVER
PR4101	High Power LED Buck Driver

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text

LED Driver PR4403 0.9 V Boost Driver PR4403 for White LEDs in Solar Lamps The PR4403 is a single cell step-up converter for white LEDs operating from a single rechargeable cell of 1.2 V supply voltage down to less than 0.9 V. An adjustable light threshold input enables an automatic switching of the LED light, e. g. by an additional light sensor or by the battery charging solar cell itself. Only three external components are required for operation of a white LED. The PR4403 is recommended for mean LED currents of up to 40 mA. This makes PR4403 ideal for use in low-cost or small-sized light applications such as solar LED lamps, LED flashlights or LCD backlighting for portable devices. FEATURES • only one 1.