ABSOLUTE MAXIMUM RATINGS
Operating ambient temperature
Operating junction temperature
Input Voltage Range
IN (Pin No.1)
CNT (Pin No.3)
OUT (Pin No.5)
HBM (Human Body Model)
MM (Machine Model)
–20 to 70
–40 to +125
–55 to +125
-0.3 to (VCC + 0.3)
Notes). This product may sustain permanent damage if subjected to conditions higher than the above stated absolute maximum rating.
This rating is the maximum rating and device operating at this range is not guaranteeable as it is higher than our stated
recommended operating range.
When subjected under the absolute maximum rating for a long time, the reliability of the product may be affected.
*1:The values under the condition not exceeding the above absolute maximum ratings and the power dissipation.
*2:Except for the power dissipation, operating ambient temperature, and storage temperature, all ratings are for Ta = 25°C.
*3:RF signal input pin. Do not apply DC current.
*4:(Vcc + 0.3) V must not be exceeded 3.6 V
*5:RF signal output pin. Do not apply DC current.
POWER DISSIPATION RATING
PD (Ta=25 °C)
PD (Ta=70 °C)
Note). For the actual usage, please refer to the PD-Ta characteristics diagram in the package specification, supply
voltage, load and ambient temperature conditions to ensure that there is enough margin follow the power and
the thermal design does not exceed the allowable value.
Although this has limited built-in ESD protection circuit, but permanent damage may occur on it.
Therefore, proper ESD precautions are recommended to avoid electrostatic damage to the MOS gates
RECOMMENDED OPERATING CONDITIONS
Supply voltage range
Note) *1 : The values under the condition not exceeding the above absolute maximum ratings and the power dissipation.
2 Ver. BEB