Datasheet4U Logo Datasheet4U.com

AN44183A - 37V / 4.0A Microstepping Motor Driver

Features

  • Built-in decoder for micro steps (2-phase, half step, 1-2 phase, W1-2 phase ,2W1-2 phase, and 4W1-2 phase excitation ) → Stepping motor can be driven by only external clock signal Interface: Clock (Rising edge detection and both edge detection) PWM can be driven by built-in CR (2-value can be selected during PWM OFF period. ) →The selection of PWM OFF period enables the best PWM drive. Mix Decay control (4-value can be selected for Fast Decay ratio) → Mix Decay control can improve accuracy of mo.

📥 Download Datasheet

Datasheet preview – AN44183A

Datasheet Details

Part number AN44183A
Manufacturer Panasonic
File Size 534.15 KB
Description 37V / 4.0A Microstepping Motor Driver
Datasheet download datasheet AN44183A Datasheet
Additional preview pages of the AN44183A datasheet.

📁 Similar Datasheet

  • AN44 - CMOS Gate Array (AMI)
  • AN440 - RAM Loader Program (Philips)
  • AN44060A - Mortordrive - Stepping (Panasonic Industrial Company)
  • AN44063A - Driver IC (Panasonic Semiconductor)
  • AN44065A - Driver IC (Panasonic Semiconductor)
  • AN44066A - Driver IC (Panasonic Semiconductor)
  • AN44067A - Driver IC (Panasonic Semiconductor)
  • AN44069A - Driver IC (Panasonic Semiconductor)
  • AN4003 - PC POWER SUPPLY DESIGN WITH KA3511 (Fairchild Semiconductor)
  • AN4009 - ALARM IC SAMPLE APPLICATIONS (Freescale Semiconductor)
Other Datasheets by Panasonic
  • AN44180A - 37V / 1.5A Stepping Motor Driver
  • AN44140A - 1-Hall-Sensor Driver
  • AN44142A - 3-phase Brushless Motor Driver
  • AN44143A - 3-phase Brushless Motor Driver
  • AN44150A - 3-Phase Brushless Motor Driver
  • AN44168A - single phase Brushless Motor Driver
  • AN44169A - single phase Brushless Motor Driver
  • AN44070A - DC Motor Driver

Full PDF Text Transcription

Click to expand full text
AN44183A 37V / 4.0A Microstepping Motor Driver FEATURES Built-in decoder for micro steps (2-phase, half step, 1-2 phase, W1-2 phase ,2W1-2 phase, and 4W1-2 phase excitation ) → Stepping motor can be driven by only external clock signal Interface: Clock (Rising edge detection and both edge detection) PWM can be driven by built-in CR (2-value can be selected during PWM OFF period.) →The selection of PWM OFF period enables the best PWM drive. Mix Decay control (4-value can be selected for Fast Decay ratio) → Mix Decay control can improve accuracy of motor current waveform. Built-in over-current protection (OCP) → If the current flows to motor output more than the setup value due to ground-fault etc., the OCP operates and all motor outputs are turned OFF.
Published: |