ECA2CHG4R7 Datasheet | Panasonic

Aluminum Electrolytic Capacitors/ NHG Radial Lead Type Series: Type: - Features - Endurance : 105 °C 1000 h to 2000 h - Ro HS directive pliant - Specifications Category Temp. Range Rated W.V. Range Nominal Cap. Range Capacitance Tolerance DC Leakage Current tan δ - 55 °C to +105 °C 6.3 V.DC to 100 V.DC 0.1 µF to 22000 µF ±20 % (120 Hz/+20 °C) I < 0.01 CV or 3 (µA) After 2 minutes (Which is greater) I < 0.06 CV +10 (µA) After 2 minutes - 25 °C to +105 °C 160 V.DC to 450 V.DC 1.0 µF to 330 µF Please see the attached standard products list After following life test with DC voltage and +105 °C±2 °C ripple current value applied (The sum of DC and ripple peak voltage shall not exceed the rated working voltage), When the capacitors are restored to 20 °C, the capacitors shall meet the limits specified below. Endurance Duration : 6.3 V.DC to 100 V.DC : (φ5 to φ8)=1000 hours, (φ10 to φ18)=2000 hours 160 V.DC to 450 V.DC : 2000 hours Capacitance change ±20 % of initial measured value tan δ < 200 % of initial specified value DC leakage current < initial specified value After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized at +20 °C, capacitors shall meet the limits specified in Endurance. (With voltage treatment) Shelf Life - Frequency correction factor for ripple current W.V.(V.DC) Cap. (µF) 0.1 to 6.3 to 100 160 to 450 47 1000 1 to to 33 470 330 Frequency (Hz) 60 0.75 0.80 0.85 0.80 120 1.00 1.00 1.00 1.00 1k 1.55 1.35 1.10 1.35 10 k 1.80 1.50 1.15 1.50 100 k 2.00 1.50 1.15 1.50 to 22000 - Dimensions in mm (not to scale) [mm] Sleeve Pressure relief φ6.3< φd±0.05 φ5 to φ8 φ10< + - L✽ ✽ L<16 : L±1.0 L>20 : L±2.0 14 min. 3 min. φD±0.5 F±0.5 φD±0.5 (mm) Body Dia. φD Lead Dia. φd Lead space F 5 0.5 2.0 6.3 0.5 2.5 8 0.6 3.5 10 0.6 5.0 12.5 0.6 5.0 16 0.8 7.5 18 0.8...