High Frequency Use (Non Magnetic Core)
Fixed Inductors (Chip Inductors)
High frequency capability due to its non magnetic core.
Capable of being Re-ﬂow or ﬂow soldered.
Unique Ceramic Core/Laser-cut Technology.
Non polarity product.
Good for mounting.
■ Recommended Applications
RF circuitry for cellular phones and wireless communication equipment.
■ Explanation of Part Numbers
1 2 3 4 5 6 7 8 9 10 11
Packaging Design No.
RF 1005 (0402)
RE 1608 (0603)
Size : mm (inch)
1N5 1.5 nH
10N 10 nH
R22 220 nH
Z ±0.2 nH
D ±0.3 nH
G ±2 %
J ±5 %
: Normal temperature (–5 to 35 °C), normal humidity (85 %RH max.), shall not be exposed to
direct sunlight and harmful gases and care should be taken so as not to cause dew.
Operating Temperature : –40 to +85 °C
Solderability may be reduced due to the conditions of high temperature and high humidity which causes the oxidation
of tin-plated terminals. Even if storage conditions are within speciﬁed limits, solderability may be reduced with the
passage of time. Therefore, please control the storage conditions and try to use the product within 6 months of receipt.
Packaging Methods, Soldering Conditions and Safety Precautions
Please see Data Files.
Design and speciﬁcations are each subject to change without notice. Ask factory for the current technical speciﬁcations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
02 Nov. 2013