LC-XD1217P-2 Datasheet | Panasonic

LC-XD1217 2003. 02 LC-XD1217 SPECIFICATIONS FOR THE RECHARGEABLE VALVE REGULATED (SEALED) LEAD-ACID BATTERY Model No. LC-XD1217P 1. Scope These specifications pertain to Shenyang Matsushita Lead-Acid Battery Co.,Ltd.`s ( SLMB`S) Rechargeable Valve Regulated (Sealed) Lead-Acid Battery, type LC-XD1217P, hereafter referred to as the “ battery ”. This document only describes the performance of the battery. The price, delivery date and other matters should be dealt with in other mutual agreements. 2. Requirements Voltage, capacity, mass and dimensions for this model are shown in Table1. Table 1 requirements Model Nominal Voltage Rated Capacity at 20hour-rate(Ah) Mass(approx. Kg) Dimensions 3. LC-XD1217P 12V 17 6.5 shown in the attached drawing Structure The battery consists mainly of positive plates, negative plates, separators, electrolyte, valves, a container and a cover. The electrolyte is absorbed in both positive/negative plate and separators. 4. Characteristics The following characteristics are for the batteries, which are manufactured within 6 months, independently. 4.1 Capacity If the battery is discharged at 4.25A to the end voltage of 10.5V per battery after a full charge, followed by standing of one hour at an ambient temperature of 25± 2? , the discharge duration time should exceed 3 hours within the first 3 times of the charge and discharge cycles. 4.2 Shelf life characteristics The duration time should be more than 80 minutes when the battery, which has been stored at an ambient temperature of 40± 2? for 4 months, then stored at an ambient temperature of 25± 2? for 24 hours and is then discharged at 4.25A to the end voltage of 10.5V per battery. 4.3 Trickle life If the battery is fully charged with a constant voltage charger with the controlled voltage of 13.7 ± 0. 10V at an ambient temperature of 25± 2? , and every 3 months the battery is discharged at a constant current of 4.25A to 10.5V at an ambient temperature of 25± 2? , the battery...