Datasheet4U Logo Datasheet4U.com

AN5765 Datasheet Crt Heater Voltage Controller

Manufacturer: Panasonic

Overview: ICs for TV AN5764N Horizontal picture position control IC for CRT monitor s Overview The AN5764N is an IC for CRT monitor horizontal picture position control. The picture position can be controlled by DC voltage, and the adoption of fin-attached SIL 7-pin package contributes to the rationalization of monitor set. R1.80 (4.20) 0.60 (17.10) 15.30±0.20 (3.80) (3.80) φ3.60±0.10 Unit: mm 1.20±0.10 2.80±0.10 12.50±0.10 7.70±0.20 1 (1.00) (6.40) 7 (0.30) 1.45±0.

General Description

s Pin No.

1 2 3 4 5 6 7 VCC Constant voltage output (3 V) Control input GND Out1 (Positive output) N.C.

Out2 (Negative output) Description Note) The fin is at the same potential as GND.

Key Features

  • CRT monitor position control.
  • Built-in low voltage output circuit.
  • Built-in DC control circuit (7.80) 22.00±0.30 (0.83) 0.60 2.54 ±0.10 (1.20) 1.80±0.20 0.35 +0.10.
  • 0.05 3.50±0.30 s.

More Datasheets from Panasonic

Part Number Description
AN5763 VERTICAL DEFLECTION SIGNAL PROCESSOR
AN5764 Horizontal picture position controller
AN5764N Horizontal picture position controller
AN5767 Synchronizing signal processor
AN5767K Synchronizing signal processor
AN5768 TILT correction-IC
AN5769 H/V convergence correction-IC
AN5707NS RV ELECTRONIC TUNER-CONTROLLOR
AN5710 B/W TV VIEDO IF Amplifer
AN5733 Dual Attenuator

AN5765 Distributor