Datasheet4U Logo Datasheet4U.com

PE43601 - RF Digital Attenuator

Description

The PE43601 is a HaRP™-enhanced, high linearity, 6-bit RF Digital Step Attenuator (DSA).

This highly versatile DSA covers a 15.75 dB attenuation range in 0.25 dB steps.

The Peregrine 50Ω RF DSA provides a serial-addressable CMOS control interface.

Features

  • HaRP™-enhanced UltraCMOS™ device.
  • Attenuation: 0.25 dB steps to 15.75 dB.
  • High Linearity: Typical +58 dBm IIP3.
  • Excellent low-frequency performance.
  • 3.3 V or 5.0 V Power Supply Voltage.
  • Fast switch settling time.
  • Programming Modes:.
  • Direct Parallel.
  • Latched Parallel.
  • Serial-Addressable: Program up to eight addresses 000 - 111.
  • Serial Two-Byte Protocol: Address and Data Word.
  • High-attenuat.

📥 Download Datasheet

Datasheet Details

Part number PE43601
Manufacturer Peregrine Semiconductor
File Size 405.56 KB
Description RF Digital Attenuator
Datasheet download datasheet PE43601 Datasheet

📁 Similar Datasheet

  • PE43610 - RF Digital Step Attenuator (pSemi)
  • PE4005 - RF CONNECTOR (Pasternack Enterprises)
  • PE4013S - N-Channel Enhancement Mode Power MOSFET (ChipSourceTek)
  • PE4013SA - N-Channel Enhancement Mode Power MOSFET (ChipSourceTek)
  • PE4025KC - N and P Channel Enhancement Mode Power MOSFET (ChipSourceTek)
  • PE40F - THYRISTOR MODULE (SanRex Corporation)
  • PE40N12 - N-Channel Enhancement Mode Power MOSFET (semi one)
  • PE40N65 - N-Channel Enhancement Mode Power MOSFET (semi one)
  • PE40P07S - P-Channel Enhancement Mode Power MOSFET (semi one)
  • PE40P13S - P-Channel Enhancement Mode Power MOSFET (semi one)
Other Datasheets by Peregrine Semiconductor
  • PE43602 - RF Digital Attenuator
  • PE43620 - RF Digital Attenuator
  • PE43650 - RF Digital Step Attenuator
  • PE4302 - RF Digital Attenuator
  • PE4304 - RF Digital Attenuator
  • PE4305 - RF Digital Attenuator
  • PE4306 - RF Digital Attenuator
  • PE4307 - RF Digital Attenuator

Full PDF Text Transcription

Click to expand full text
Product Description The PE43601 is a HaRP™-enhanced, high linearity, 6-bit RF Digital Step Attenuator (DSA). This highly versatile DSA covers a 15.75 dB attenuation range in 0.25 dB steps. The Peregrine 50Ω RF DSA provides a serial-addressable CMOS control interface. It maintains high attenuation accuracy over frequency and temperature and exhibits very low insertion loss and low power consumption. Performance does not change with VDD due to on-board regulator. This next generation Peregrine DSA is available in a 5x5 mm 32-lead QFN footprint. The PE43601 is manufactured on Peregrine’s UltraCMOS™ process, a patented variation of silicon-on-insulator (SOI) technology on a sapphire substrate, offering the performance of GaAs with the economy and integration of conventional CMOS. Figure 1.
Published: |