PI7C9X130 Datasheet | Pericom Semiconductor

Description First Draft of PI7C9X130 Data Sheet Correct INTA, B, C, D buffer type Update configuration map and registers Update JTAG chain order Add PCI/PCI-X selection information Update on configuration register bit definitions. 1) Bit [10, 7:2] of offset 40h 2) Bit [31:30] of offset 68h 3) Bit [0] of offset 70h 4) Bit [23:22] of offset 94h 5) Bit [7:1] of offset 164h Correct typo of pin CLKRUN_L in pin assignment and JTAG section. Add Absolute Maximum Ratings Correct pin description : 1. REQ_L as GPI and GNT_L as GPO 2. CLKOUT [8:0] as CLKOUT [6:0] Correct default setting for bit [31:30] of offset 68h pleted non-transparent function for address 28h - 2Bh in the Configuration Register Map - section 7.1 Corrected pin HSEN (R3) in section 2.6 - Miscellaneous Signals. Should read tie LOW if Hot Swap is not used instead of tie HIGH Revised table 8-1 in section 8 Address bit[5] corrected to equal 0 Address bit[4] corrected to equal...